;=====================================================================
; GSD-Datei fuer AUMA AUMATIC Profibus-DP Anschaltung
;
; Autor: B. Wissler
; Datum: 19.04.2001
;
; Z038338_00.GSD corresponds with the former version AUMATIC2.GSD
; 29.11.04 / W.Thomann
;
; Rename because of required naming conventions in PNO and SIEMENS-
; PLC. File-Name has to meet the 8.3 standard (required by SIEMENS S7) 
; and additionally the PNO conventions.
; Old name: Z038338_00.GSD. New name: AC0105CD.GSD
; HP Ihringer, 2005-04-06
;=====================================================================
;
#Profibus_DP
GSD_Revision = 2
;
;
Vendor_Name        = "Auma Werner Riester GmbH & Co KG"
Model_Name         = "Aumatic AUMA"
Revision           = "DP AUMATIC"
Ident_Number       = 0x05CD
;
Protocol_Ident     = 0
Station_Type       = 0
FMS_Supp           = 0                   
Hardware_Release   = "Z031.231/01"
Software_Release   = "Z031.320/01"
;
9.6_supp           = 1
19.2_supp          = 1
45.45_supp         = 1
93.75_supp         = 1
187.5_supp         = 1
500_supp           = 1
1.5M_supp          = 1
;
MaxTsdr_9.6        = 60
MaxTsdr_19.2       = 60
MaxTsdr_45.45      = 250
MaxTsdr_93.75      = 60
MaxTsdr_187.5      = 60
MaxTsdr_500        = 100
MaxTsdr_1.5M       = 150
;
Redundancy         = 1
Repeater_Ctrl_Sig  = 0
24V_Pins           = 0
Freeze_Mode_Supp   = 1
Sync_Mode_Supp     = 1
Auto_Baud_supp     = 1
Set_Slave_Add_supp = 0
Slave_Family       = 1							;pcn
Fail_Safe          = 1
Implementation_Type= "SPC3"
Bitmap_Device      = "aumatic"
;
User_Prm_Data_Len  = 13
;
User_Prm_Data = \
0x00, 0x00, 0x00, \ ; 3 Bytes für DPV1 freilassen
0x00, \             ; Auswahl des Prozessabbildes
0x01, \             ; Userdefiniertes Bit 0
0x02, \             ; Userdefiniertes Bit 1
0x15, \             ; Userdefiniertes Bit 2 
0x0B, \             ; Userdefiniertes Bit 3
0x0C, \             ; Userdefiniertes Bit 4 
0x24, \             ; Userdefiniertes Bit 5
0x22, \             ; Userdefiniertes Bit 6
0x02, \             ; Userdefiniertes Bit 7
0x01                ; Analoges Format (0..100 Prozent oder 0..1000 Promille)
;
;
Min_Slave_Intervall = 1
Modular_Station     = 1
Max_Module          = 1
Max_Input_Len       = 22
Max_Output_Len      = 14
Max_Data_Len        = 36
Max_Diag_Data_Len   = 6
;
Module = "1 Byte Input, 1 Byte Output" 0x10, 0x20
EndModule
;
Module = "4 Byte In, 4 Byte Out,konsistent" 0x93, 0xA3
EndModule
;
Module = "8 Byte In, 4 Byte Out,konsistent" 0x97, 0xA3
EndModule
;
Module = "12 Byte In,4 Byte Out,konsistent" 0x9B, 0xA3
EndModule
;
Module = "16 Byte In,8 Byte Out,konsistent" 0x9F, 0xA7
EndModule
;
Module = "16 Byte In, 8 Byte Out" 0x1F, 0x27 
EndModule
;
;
Module = "4 Byte Input, 4 Byte Output" 0x13, 0x23
EndModule
;
Module = "8 Byte Input, 4 Byte Output" 0x17, 0x23
EndModule
;
Module = "12 Byte Input,4 Byte Output" 0x1B, 0x23
EndModule
;
Module = "2 Byte In, 1 Byte Out,konsistent" 0x91, 0x20
EndModule
;
Module = "2 Byte Input, 1 Byte Output" 0x11, 0x20
EndModule
;
Module = "2 Byte In, 2 Byte Out,konsistent" 0x91, 0xA1
EndModule
;
Module = "2 Byte Input, 2 Byte Output" 0x11, 0x21
EndModule
;
Module = "6 Byte In, 1 Byte Out,konsistent" 0x95, 0x20
EndModule
;
Module = "6 Byte Input, 1 Byte Output" 0x15, 0x20
EndModule
;
Module = "6 Byte In, 2 Byte Out,konsistent" 0x95, 0xA1
EndModule
;
Module = "6 Byte Input, 2 Byte Output" 0x15, 0x21
EndModule
;
Module = "6 Byte In, 4 Byte Out,konsistent" 0x95, 0xA3
EndModule
;
Module = "6 Byte Input, 4 Byte Output" 0x15, 0x23
EndModule
;
Module = "20 Byte Input, 8 Byte Output" 0x17, 0x3B
EndModule
;
Module = "22 Byte Input, 8 Byte Output" 0x17, 0x3D
EndModule
;
;
; Prm-Text-Def-List:
;
PrmText = 1
Text(0) = "Prozessabbild 1"
Text(1) = "Prozessabbild 2"
Text(2) = "Prozessabbild 3"
Text(3) = "Prozessabbild 4"
EndPrmText
;
PrmText = 2
Text(0) = "nicht verwendet"
Text(1) = "Endlage ZU"
Text(2)	 = "Endlage AUF"	
Text(3)	 = "Faehrt ZU"
Text(4) = "Faehrt AUF"
Text(5)	 = "Antrieb faehrt"
Text(6)	 = "WSR"
Text(7)	 = "WOEL"
Text(8)	 = "DSR"
Text(9) = "DOEL"
Text(10) = "Thermofehler"
Text(11	) = "DSR-Fehler"
Text(12	) = "DOEL-Fehler"
Text(13	) = "Drehmoment-Fehler"
Text(14	) = "Sigbr. E1 (Sollpos)"
Text(15	) = "Sigbr. E2 (Istpos.)"
Text(16	) = "Sigbr. E3 (Drehz.)"
Text(17	) = "Sigbr. E6 (Drehmo.)"
Text(18	) = "Stellzeitwarnung"
Text(19	) = "ED Warnung"
Text(20	) = "Wahlschalter ORT"
Text(21	) = "Wahlschalter FERN"
Text(22	) = "Wahlschalter AUS"
Text(23	) = "Fern Auf-Zu"
Text(24	) = "Fern Soll"
Text(25	) = "Zwischenstellung 1"
Text(26	) = "Zwischenstellung 2"
Text(27	) = "Zwischenstellung 3"
Text(28	) = "Zwischenstellung 4"
Text(29	) = "Taktstrecke betreten"
Text(30	) = "Endl.ZU + Blinker"
Text(31	) = "Endl.AUF + Blinker"
Text(32	) = "Fehlermeldung"
Text(33	) = "Warnungsmeldung"
Text(34	) = "Nicht bereit FERN"
Text(35	) = "Ist Soll"
Text(36	) = "Phasenausfall"
Text(37	) = "Sigbr. Par1_An2_in"
Text(38	) = "Sigbr. Par1_An1_in"
Text(39	) = "WS nicht Fern"
Text(40	) = "Falsches Kommando"
Text(41	) = "Interner Fehler"
Text(42	) = "LE-Fehler"
Text(43	) = "Keine Referenzfahrt"
Text(44	) = "Interne Warnung"
Text(45	) = "Kanal 2 aktiv"
EndPrmText
;
PrmText = 3
Text(0) = "Stoerung 1"
Text(1) = "Stoerung 2"
Text(2) = "Stoerung 3"
Text(3) = "Stoerung 4"
Text(4) = "Stoerung 5"
Text(5) = "Stoerung 6"
Text(6) = "Stoerung 7"
Text(7) = "Stoerung 8"
Text(8) = "Stoerung 9"
Text(9) = "Stoerung 10"
EndPrmText
;
PrmText = 4
Text(0) = "0 bis 100 Prozent"
Text(1) = "0 bis 1000 Promille"
EndPrmText
; Ext-User-Prm-Data-Def-List:
;
;User_Prm_Data_Definition 1
ExtUserPrmData = 1 "Input-Prozess-Abbild"
Unsigned16 0 0-3
Prm_Text_Ref = 1
EndExtUserPrmData
;
;User_Prm_Data_Definition 2
ExtUserPrmData = 2 "Definierbares Bit 0"
Unsigned16 1 0-45
Prm_Text_Ref = 2
EndExtUserPrmData
;
;User_Prm_Data_Definition 3
ExtUserPrmData = 3 "Definierbares Bit 1"
Unsigned16 2 0-45
Prm_Text_Ref = 2
EndExtUserPrmData
;
;User_Prm_Data_Definition 4
ExtUserPrmData = 4 "Definierbares Bit 2"
Unsigned16 21 0-45
Prm_Text_Ref = 2
EndExtUserPrmData
;
;User_Prm_Data_Definition 5
ExtUserPrmData = 5 "Definierbares Bit 3"
Unsigned16 11 0-45
Prm_Text_Ref = 2
EndExtUserPrmData
;
;User_Prm_Data_Definition 6
ExtUserPrmData = 6 "Definierbares Bit 4"
Unsigned16 12 0-45
Prm_Text_Ref = 2
EndExtUserPrmData
;
;User_Prm_Data_Definition 7
ExtUserPrmData = 7 "Definierbares Bit 5"
Unsigned16 36 0-45
Prm_Text_Ref = 2
EndExtUserPrmData
;
;User_Prm_Data_Definition 8
ExtUserPrmData = 8 "Definierbares Bit 6"
Unsigned16 34 0-45
Prm_Text_Ref = 2
EndExtUserPrmData
;
;User_Prm_Data_Definition 9
ExtUserPrmData = 9 "Definierbares Bit 7"
Unsigned16 2 0-9
Prm_Text_Ref = 3
EndExtUserPrmData
;
;User_Prm_Data_Definition 10
ExtUserPrmData = 10 "Format der analogen Signale"
Unsigned16 1 0-1
Prm_Text_Ref = 4
EndExtUserPrmData
;
Max_User_Prm_Data_Len = 14
;
Ext_User_Prm_Data_Const (0) = 0x00
Ext_User_Prm_Data_Const (1) = 0x00
Ext_User_Prm_Data_Const (2) = 0x00
Ext_User_Prm_Data_Ref(3) = 1
Ext_User_Prm_Data_Ref(4) = 2
Ext_User_Prm_Data_Ref(5) = 3
Ext_User_Prm_Data_Ref(6) = 4
Ext_User_Prm_Data_Ref(7) = 5
Ext_User_Prm_Data_Ref(8) = 6
Ext_User_Prm_Data_Ref(9) = 7
Ext_User_Prm_Data_Ref(10) = 8
Ext_User_Prm_Data_Ref(11) = 9
Ext_User_Prm_Data_Ref(12) = 10