;**********************************************************************
;*                                                                    *
;*  MODULE             : GSD-File for PA 200 device (Discrete output) *
;*                                                                    *
;*  FILE NAME          : ASCO0664.GSD                                 *
;*                                                                    *
;*  Authors            : CW/PMS                                       *
;*                                                                    *
;*  DATE               : 18.FEB.2003                                  *
;*                                                                    *
;**********************************************************************

#Profibus_DP
GSD_Revision        = 3

Vendor_Name         = "ASCO"
Model_Name          = "PA-200 ASCO"
Revision            = "1.0"
Ident_Number        = 0x0664    ; Manufacturer specific ident nr
Protocol_Ident      = 0 		   ; Profibus DP
Station_Type        = 0 		   ; DP Slave
FMS_supp            = 0
Hardware_Release    = "1.00"
Software_Release    = "1.00"
Bitmap_Device       = "PA200_D"

31.25_supp          = 1
45.45_supp          = 1
93.75_supp          = 1
MaxTsdr_31.25       = 100
MaxTsdr_45.45       = 250
MaxTsdr_93.75       = 1000

Redundancy          = 0
Repeater_Ctrl_Sig   = 0
24V_Pins            = 0
Freeze_Mode_supp    = 1
Sync_Mode_supp      = 1
Set_Slave_Add_supp  = 1
Fail_safe           = 0
Min_Slave_Intervall = 250

Max_User_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x00, 0x00, 0x00

Slave_Family        = 12
Max_Diag_Data_Len   = 14

;----------- Description of extended DP features: ---------------------
;
;DPV1_Slave = 1
;C2_Read_Write_supp      = 1
;C2_Max_Data_Len         = 50
;C2_Read_Write_required  = 1
;C2_Max_Count_Channels   = 2
;Max_Initiate_PDU_Length = 52
;C2_Response_Timeout     = 4000
;DPV1_Data_Types         = 1

;--- Description of physical interface for async. and sync. transmission: ---
Physical_Interface = 0                     ; RS-485 Standard Copper
Transmission_Delay_45.45 = 0
Reaction_Delay_45.45     = 0
Transmission_Delay_93.75 = 0
Reaction_Delay_93.75     = 0
End_Physical_Interface
;
Physical_Interface = 1                     ; IEC61158-2
Transmission_Delay_31.25 = 0
Reaction_Delay_31.25     = 0
End_Physical_Interface

;--------------------------------------------------------------------------------------
;  Module-Information
;--------------------------------------------------------------------------------------

Modular_Station     = 1
Max_Module          = 1
Max_Input_Len       = 5
Max_Output_Len      = 2
Max_Data_Len        = 7

Module="SP_D" 0xA1
1
EndModule
Module="SP_D+READBACK_D" 0xC1, 0x81, 0x81, 0x83
2
EndModule
Module="SP_D+CHECKBACK_D" 0xC1, 0x81, 0x82, 0x92
3
EndModule
Module="SP_D+READBACK_D+CHECKBACK_D" 0xC1, 0x81, 0x84, 0x93
4
EndModule

;----------- Description of the module assignment: ---------------------
;
SlotDefinition
Slot(1) = "Discrete Output 1" 1 1-4
EndSlotDefinition