;================================================================
; GSD-Datei fuer UDS7-PB-S (Profibus-DP)
;
; Kurzprofil (8 Byte)
;
; Barksdale Control Products GmbH
; Dorn-Assenheimer Str. 27
; 61203 Reichelsheim
; Tel: (06035) 949-160 
; Fax: (06035) 949-111
;
;
; Autor : Werner Ringelstein
; Stand : 10.04.2001
;================================================================
;
;
#Profibus_DP
GSD_Revision		= 2
Vendor_Name 		= "Barksdale Control GmbH"
Model_Name  		= "UDS7 BARKSDALE"
Revision    		= "B"
Ident_Number 		= 0x04E1
Protocol_Ident 		= 0
Station_Type 		= 0
FMS_supp 		= 0
Hardware_Release 	= "B0X"
Software_Release 	= "7X"
9.6_supp 		= 1
19.2_supp 		= 1
93.75_supp 		= 1
187.5_supp 		= 1
500_supp 		= 1
1.5M_supp 		= 1
3M_supp 		= 1
6M_supp 		= 1
12M_supp 		= 1
MaxTsdr_9.6 		= 60
MaxTsdr_19.2 		= 60
MaxTsdr_93.75 		= 60
MaxTsdr_187.5 		= 60
MaxTsdr_500 		= 100
MaxTsdr_1.5M 		= 150
MaxTsdr_3M 		= 250
MaxTsdr_6M 		= 450
MaxTsdr_12M 		= 800
Redundancy 		= 0
Repeater_Ctrl_Sig 	= 0
24V_Pins 		= 0
Implementation_Type	= "SPC3"
;
;--Slave specific Values--
;
Freeze_Mode_supp 	= 1
Sync_Mode_supp 		= 1
Auto_Baud_supp 		= 1
Set_Slave_Add_supp 	= 1
User_Prm_Data_Len 	= 05		; Length will be checked
User_Prm_Data 		= 0x00, 0x00, 0x00, 0x00, 0x00 ; contents are not checked
Min_Slave_Intervall	= 1
Modular_Station 	= 0
Max_Diag_Data_Len	= 6		; no user diagnostic
;
; Module byte-organized, input only 
;
Module="8 Bytes IN" 0x97
EndModule
;
Slave_Family		= 0