#Profibus_DP
GSD_Revision        = 2
;
Vendor_Name         = "BARTEC GmbH"
Model_Name          = "Ex I/O BARTEC"
;ORDERNUMBER         = "07-7331-2305"
Revision            = "22.04.1999"
Ident_Number        = 0x2305
Protocol_Ident      = 0
Station_Type        = 0
FMS_supp            = 0
Hardware_Release    = "HR1"
Software_Release    = "SR1"
;
9.6_supp            = 1
19.2_supp           = 1
45.45_supp          = 1
93.75_supp          = 1
187.5_supp          = 1
500_supp            = 1
1.5M_supp           = 1
;
MaxTsdr_9.6         = 60
MaxTsdr_19.2        = 60
MaxTsdr_45.45       = 250
MaxTsdr_93.75       = 60
MaxTsdr_187.5       = 60
MaxTsdr_500         = 100
MaxTsdr_1.5M        = 150
;
Redundancy          = 0
Repeater_Ctrl_Sig   = 2
24V_Pins            = 0
Implementation_Type = "LSPM2"
;
Freeze_Mode_supp    = 1
Sync_Mode_supp      = 1
Auto_Baud_supp      = 1
Set_Slave_Add_supp  = 0
Min_Slave_Intervall = 1
;
Modular_Station     = 0
;Max_Module          = 1
;Max_Input_Len       = 1
;Max_Output_Len      = 1
;Max_Data_Len        = 2
Modul_Offset        = 0
User_Prm_Data_Len   = 5
User_Prm_Data       = 0x00, 0x00, 0x00, 0x00, 0x00
;
Fail_Safe           = 0
Slave_Family        = 3
Max_Diag_Data_Len   = 13
;
Unit_Diag_Bit(16)   = "IN ch.1 short circ. / wire break"
Unit_Diag_Bit(17)   = "IN ch.2 short circ. / wire break"
Unit_Diag_Bit(18)   = "IN ch.3 short circ. / wire break"
Unit_Diag_Bit(19)   = "IN ch.4 short circ. / wire break"
Unit_Diag_Bit(20)   = "IN ch.5 short circ. / wire break"
Unit_Diag_Bit(21)   = "IN ch.6 short circ. / wire break"
Unit_Diag_Bit(22)   = "IN ch.7 short circ. / wire break"
Unit_Diag_Bit(23)   = "IN ch.8 short circ. / wire break"
Unit_Diag_Bit(24)   = "OUT ch.1 short circ. / overload"
Unit_Diag_Bit(25)   = "OUT ch.2 short circ. / overload"
Unit_Diag_Bit(26)   = "OUT ch.3 short circ. / overload"
Unit_Diag_Bit(27)   = "OUT ch.4 short circ. / overload"
Unit_Diag_Bit(28)   = "power U2 missing"
;
;
Module = "module 1" 0x20,0x10
EndModule
;