;************************ COMPANY INFORMATION ************************* ;* * ;* CREATED by Endress+Hauser GmbH+Co. * ;* PUBLISHED by Endress+Hauser Process Solutions AG, CH-4153 Reinach * ;* * ;******************** DEVICE and FILE INFORMATION ********************* ;* * ;* FILE NAME: EH3_152B.GSD * ;* DEVICE TYPE: PROFIBUS-PA * ;* DEVICE INFORMATION: Liquiphant M/S * ;* PROFILE COMPATIBILITY: PROFILE 3.0 * ;* DPV1 IMPLEMENTATION: MSAC1_Read/Write * ;* MSAC2_Read/Write * ;* IDENTIFIER FORMAT: Standard * ;* * ;********************** GSD REVISION INFORMATION ********************** ;* $Revision: 1.0 $ * ;* $Date: Fri Feb 16 16:00:00 2001 $ * ;* * ;* DATE | NAME | VERSION | COMMENT * ;* ---------------------------------------------------------------------- * ;* 16.02.2001 | | 1.0 | initial revision * ;************************************************************************** ;**************************** General DP Keywords *********************** #Profibus_DP GSD_Revision = 3 Vendor_Name = "Endress + Hauser" Model_Name = "Liquiphant M/S E+H" Revision = "Profile 3.0" Ident_Number = 0x152B Protocol_Ident = 0 Station_Type = 0 FMS_supp = 0 Hardware_Release = "V1.0" Software_Release = "V1.0" 31.25_supp = 1 45.45_supp = 1 93.75_supp = 1 MaxTsdr_31.25 = 100 MaxTsdr_45.45 = 250 MaxTsdr_93.75 = 1000 Implementation_Type = "SPC4/ITEC" Bitmap_Device = "EH152b_n" Bitmap_Diag = "EH152b_d" Bitmap_SF = "EH152b_s" ;********* Additional Keywords For Different Physical Interfaces ******** ;***************** DP Master (Class 1) Related Keywords ***************** ;********* Additional Master Related Keywords For DP Extensions ********* ;******************** Basic DP-Slave Related Keywords ******************* Freeze_Mode_supp = 1 Sync_Mode_supp = 0 Auto_Baud_supp = 0 Set_Slave_Add_supp = 1 Min_Slave_Intervall = 250 Modular_Station = 0 Max_Diag_Data_Len = 20 Max_User_Prm_Data_Len = 3 Ext_User_Prm_Data_Const(0) = 0x00, 0x00, 0x00 Unit_Diag_Bit(16) = "Error appears" Unit_Diag_Bit(17) = "Error disappears" Unit_Diag_Bit(24) = "Hardware failure electronics" Unit_Diag_Bit(35) = "Restart" Unit_Diag_Bit(36) = "Coldstart" Unit_Diag_Bit(37) = "Maintenance required" Unit_Diag_Bit(55) = "Extension Available" Unit_Diag_Bit(56) = "no error" Unit_Diag_Bit(57) = "A101: Sensor EEPROM chksum error" Unit_Diag_Bit(58) = "A102: Kom. EEPROM checksum error" Unit_Diag_Bit(59) = "A111: IIC failure" Unit_Diag_Bit(60) = "A125: Sensor defective" Unit_Diag_Bit(61) = "A261: Temp. Sensor defective" Unit_Diag_Bit(62) = "W103: Initialization active" Unit_Diag_Bit(63) = "W200: Measure disturbed" Unit_Diag_Bit(64) = "W661: Temp. at sensor too high" Module = "Discrete In" 0x91 1 EndModule Slave_Family = 12 DPV1_Slave = 1 C1_Read_Write_supp = 1 C2_Read_Write_supp = 1 C1_Max_Data_Len = 50; C2_Max_Data_Len = 50; C1_Response_Timeout = 100; C2_Response_Timeout = 100; C2_Max_Count_Channels = 2; Max_Initiate_PDU_Length = 52; ;************** Additional Keywords For Module Assignment *************** ;*************** Slave Related Keywords For DP Extensions *************** ;************* Slave Related Keywords For ProfiSafe Profile *************