; Base GSD File for Eurotherm Controls 2400 Series Industrial Temperature
; Controller 
; General Information: V1.4 8th March 2002. TJL

#Profibus_DP
GSD_Revision = 2
Vendor_Name = "EUROTHERM Controls"
Model_Name = "2400 Eurotherm"
Revision = "1.4"
Ident_Number = 0x2400
Protocol_Ident = 0	                ; PROFIBUS DP
Station_Type = 0                        ; DP-slave
FMS_supp = 0
Hardware_Release = "V1.2"
Software_Release = "E4.3"
Redundancy = 0
Repeater_Ctrl_Sig = 0
24V_Pins = 0
Implementation_Type = "SPC3"
Slave_Family = 5			; control family
Bitmap_Device = "EUR2400"
Bitmap_Diag   = "EUR2400D"
Bitmap_SF     = "EUR2400"
Max_Diag_Data_Len = 9

;Supported Communication Speed:

Auto_Baud_supp = 1

9.6_supp = 1                            ; Max length = 1200m (line type A or B)
19.2_supp = 1                           ; Max length = 1200m (type A or B)
45.45_supp = 1
93.75_supp = 1                          ; Max length = 1200m (type A or B)
187.5_supp = 1                          ; Max length = 1000m (type A)
500_supp = 1                            ; Max length = 400m (type A)
1.5M_supp = 1                           ; Max length = 200m (type A)
MaxTsdr_9.6 = 60                        ; unit = tbit
MaxTsdr_19.2 = 60                       ; unit = tbit
MaxTsdr_45.45 = 60
MaxTsdr_93.75 = 60                      ; unit = tbit
MaxTsdr_187.5 = 60                      ; unit = tbit
MaxTsdr_500 = 100                       ; unit = tbit
MaxTsdr_1.5M = 150                      ; unit = tbit

; DP_Slave Information:

Freeze_Mode_supp = 1
Sync_Mode_supp = 1
Set_Slave_Add_supp = 0                  ; Set via instrument UI
Min_Slave_Intervall = 20                ;2ms
Modular_Station = 0                     ; for use with several configurators
Fail_Safe = 0

; Parametrization:

User_Prm_Data_Len = 17
User_Prm_Data = 0x00,0x00,0x01,0x00,0x05,0x00,0x03,0x00,0x4B,0x00,0x18,0x00,\
0x19,0x00,0x0F,0x01,0x12
Module = "TC2400" 0x53,0x63
Endmodule