; ;********* GSD-file for BCL34 produced by Leuze electronic GmbH + Co. KG ************ ;* ================================================================================ * ;* filename: leuz05d8.gsd * ;* -------------------------------------------------------------------------------- * ;* author: Joerg Linsenmayer (LEW) * ;* rev.: 1.14 ( based on 1.13): - added modul 47 "service" * ;* - new parameters in modul 11 * ;* 1.15 ( based on 1.14): - correction of some values, to match docu * ;* 1.16 ( based on 1.15): - added Unit-Diag-List * ;* - new parameters in modul 7 and 8 * ;* 1.17 ( based on 1.16): - added modul 48 and 49 * ;* * ;* -------------------------------------------------------------------------------- * ;* * ;************************************************************************************ ; ; #Profibus_DP ; ; PrmText=1 Text(0) ="kein Code" Text(1) ="2/5 Interleaved" Text(2) ="Code39" Text(6) ="UPCA/UPCE" Text(7) ="EAN8/13" Text(8) ="Code128/EAN128" Text(9) ="Pharmacode" Text(10)="EAN Addendum" Text(11)="Codabar" Text(12)="Code93" EndPrmText PrmText=2 Text(0) ="Aufzaehlung" Text(1) ="Bereich" EndPrmText PrmText=3 Text(0) ="Nein" Text(1) ="Ja" EndPrmText PrmText=4 Text(0) ="Dekodierunabhaengig" Text(1) ="Dekodierabhaengig" EndPrmText PrmText=5 Text(0) ="Nein" Text(1) ="Ja" EndPrmText PrmText=6 Text(0) ="Nein" Text(1) ="Ja" EndPrmText PrmText=7 Text(0) ="Modulo 10, Gewichtung 3" Text(1) ="Modulo 11, Gewichtung 2-9" Text(2) ="Modulo 10, Gewichtung 2" Text(3) ="Modulo 10, Gewichtung 4/9" EndPrmText PrmText=9 Text(0) ="Normal" Text(1) ="Invers" EndPrmText PrmText=10 Text(0) ="letztes Ergebnis" Text(1) ="Initialisierungswert (Null)" EndPrmText PrmText=11 Text(0) ="Linksbuendig" Text(1) ="Rechtsbuendig" EndPrmText PrmText=12 Text(0) ="Nicht auffuellen" Text(3) ="Auf Uebertragungslaenge" EndPrmText PrmText=13 Text(0) ="Nein" Text(1) ="Ja" EndPrmText PrmText=14 Text(0) ="Aus" Text(1) ="Ein" EndPrmText PrmText=15 Text(0) ="keine Funktion" Text(1) ="Lesetoraktivierung" EndPrmText PrmText=16 Text(0) ="LOW (0V)" Text(1) ="HIGH (+Ub)" EndPrmText PrmText=17 Text(0) ="Aus" Text(1) ="Ein" EndPrmText PrmText=18 Text(1) ="Normal" Text(4) ="mit Lesetorsteuerung (Single)" Text(3) ="ohne Lesetorsteuerung (Single)" Text(2) ="mit Lesetorsteuerung (Raster)" Text(5) ="ohne Lesetorsteuerung (Raster)" EndPrmText PrmText=19 Text(0) ="Aus" Text(1) ="Labelqualitaet" Text(2) ="Dekodierqualitaet" EndPrmText PrmText=21 Text(0) ="keine Ereignisausgabe" Text(1) ="Ref-Vergleich 1" Text(2) ="Ref-Vergleich 1 UND 2 gueltig" Text(4) ="Ref-Vergleich 1 ODER 2 gueltig" EndPrmText PrmText=22 Text(0) ="nicht beruecksichtigen" Text(1) ="beruecksichtigen" EndPrmText PrmText=23 Text(0) ="nicht ausgeben" Text(1) ="ausgeben" EndPrmText PrmText=24 Text(0) ="SWOUT schaltet einmalig" Text(1) ="SWOUT schaltet mehrmalig" EndPrmText PrmText=25 Text(0) ="Resetbit und [AF] in Modul 14" Text(1) ="auch bei Vergleichswert erreicht" EndPrmText ;----- ------------------------------------------------- ;------------------------------ ; for device parameter data ;------------------------------ ExtUserPrmData=100 "[T1] Codeart" Unsigned8 1 0-12 Prm_Text_Ref=1 EndExtUserPrmData ExtUserPrmData=101 "[T1] Modus Stellenanzahl" Bit(6) 0 0-1 Prm_Text_Ref=2 EndExtUserPrmData ExtUserPrmData=102 "[T1] Stellenanzahl 1" BitArea(0-5) 10 0-63 EndExtUserPrmData ExtUserPrmData=103 "[T1] Stellenanzahl 2" BitArea(0-5) 0 0-63 EndExtUserPrmData ExtUserPrmData=104 "[T1] Stellenanzahl 3" BitArea(0-5) 0 0-63 EndExtUserPrmData ExtUserPrmData=105 "[T2] Codeart" Unsigned8 2 0-12 Prm_Text_Ref=1 EndExtUserPrmData ExtUserPrmData=106 "[T2] Modus Stellenanzahl" Bit(6) 1 0-1 Prm_Text_Ref=2 EndExtUserPrmData ExtUserPrmData=107 "[T2] Stellenanzahl 1" BitArea(0-5) 4 0-63 EndExtUserPrmData ExtUserPrmData=108 "[T2] Stellenanzahl 2" BitArea(0-5) 48 0-63 EndExtUserPrmData ExtUserPrmData=109 "[T2] Stellenanzahl 3" BitArea(0-5) 0 0-63 EndExtUserPrmData ExtUserPrmData=110 "[T3] Codeart" Unsigned8 7 0-12 Prm_Text_Ref=1 EndExtUserPrmData ExtUserPrmData=111 "[T3] Modus Stellenanzahl" Bit(6) 0 0-1 Prm_Text_Ref=2 EndExtUserPrmData ExtUserPrmData=112 "[T3] Stellenanzahl 1" BitArea(0-5) 8 0-63 EndExtUserPrmData ExtUserPrmData=113 "[T3] Stellenanzahl 2" BitArea(0-5) 13 0-63 EndExtUserPrmData ExtUserPrmData=114 "[T3] Stellenanzahl 3" BitArea(0-5) 0 0-63 EndExtUserPrmData ExtUserPrmData=115 "[T4] Codeart" Unsigned8 8 0-12 Prm_Text_Ref=1 EndExtUserPrmData ExtUserPrmData=116 "[T4] Modus Stellenanzahl" Bit(6) 1 0-1 Prm_Text_Ref=2 EndExtUserPrmData ExtUserPrmData=117 "[T4] Stellenanzahl 1" BitArea(0-5) 4 0-63 EndExtUserPrmData ExtUserPrmData=118 "[T4] Stellenanzahl 2" BitArea(0-5) 63 0-63 EndExtUserPrmData ExtUserPrmData=119 "[T4] Stellenanzahl 3" BitArea(0-5) 0 0-63 EndExtUserPrmData ;------------------------------ ; for modul 1-4 ;------------------------------ ExtUserPrmData=200 "Codeart" Unsigned8 0 0-12 Prm_Text_Ref=1 EndExtUserPrmData ExtUserPrmData=201 "Modus Stellenanzahl" Bit(6) 0 0-1 Prm_Text_Ref=2 EndExtUserPrmData ExtUserPrmData=202 "Stellenanzahl 1" BitArea(0-5) 0 0-63 EndExtUserPrmData ExtUserPrmData=203 "Stellenanzahl 2" BitArea(0-5) 0 0-63 EndExtUserPrmData ExtUserPrmData=204 "Stellenanzahl 3" BitArea(0-5) 0 0-63 EndExtUserPrmData ;------------------------------ ; for modul 5 ;------------------------------ ExtUserPrmData=210 "Barcodeanzahl" Unsigned8 1 1-20 EndExtUserPrmData ;------------------------------ ; for modul 6 ;------------------------------ ExtUserPrmData=220 "automatische Lesetorwiederholung" Unsigned8 0 0-1 Prm_Text_Ref=3 EndExtUserPrmData ExtUserPrmData=221 "Lesetorende-Modus" Unsigned8 1 0-1 Prm_Text_Ref=4 EndExtUserPrmData ExtUserPrmData=222 "Restart Verzoegerung (in ms)" Unsigned16 0 0-60000 EndExtUserPrmData ExtUserPrmData=223 "maximale Lesetordauer (in ms)" Unsigned16 0 0-60000 EndExtUserPrmData ExtUserPrmData=224 "Lesetorende n. Scans ohne Daten" Unsigned16 0 0-60000 EndExtUserPrmData ;------------------------------ ; for modul 7 ;------------------------------ ExtUserPrmData=230 "Pruefzifferausw. 2/5 Interleaved" Bit(1) 0 0-1 Prm_Text_Ref=5 EndExtUserPrmData ExtUserPrmData=231 "Pruefzifferausw. Code39" Bit(2) 0 0-1 Prm_Text_Ref=5 EndExtUserPrmData ExtUserPrmData=244 "Pruefzifferausw. UPC" Bit(6) 1 0-1 Prm_Text_Ref=5 EndExtUserPrmData ExtUserPrmData=245 "Pruefzifferausw. EAN" Bit(7) 1 0-1 Prm_Text_Ref=5 EndExtUserPrmData ExtUserPrmData=232 "Pruefzifferausw. Pharmacode" Bit(2) 0 0-1 Prm_Text_Ref=5 EndExtUserPrmData ExtUserPrmData=233 "Pruefzifferausw. Codabar" Bit(3) 0 0-1 Prm_Text_Ref=5 EndExtUserPrmData ExtUserPrmData=246 "Pruefzifferausw. Code93" Bit(4) 1 0-1 Prm_Text_Ref=5 EndExtUserPrmData ExtUserPrmData=243 "Pruefzifferausw. Code128" Bit(0) 1 0-1 Prm_Text_Ref=5 EndExtUserPrmData ExtUserPrmData=234 "Pruefzifferausg. 2/5 Interleaved" Bit(1) 0 0-1 Prm_Text_Ref=6 EndExtUserPrmData ExtUserPrmData=235 "Pruefzifferausg. Code39" Bit(2) 0 0-1 Prm_Text_Ref=6 EndExtUserPrmData ExtUserPrmData=236 "Pruefzifferausg. UPC" Bit(6) 1 0-1 Prm_Text_Ref=6 EndExtUserPrmData ExtUserPrmData=237 "Pruefzifferausg. EAN" Bit(7) 1 0-1 Prm_Text_Ref=6 EndExtUserPrmData ExtUserPrmData=238 "Pruefzifferausg. Code128" Bit(0) 0 0-1 Prm_Text_Ref=6 EndExtUserPrmData ExtUserPrmData=239 "Pruefzifferausg. Pharmacode" Bit(1) 0 0-1 Prm_Text_Ref=6 EndExtUserPrmData ExtUserPrmData=240 "Pruefzifferausg. Codabar" Bit(3) 0 0-1 Prm_Text_Ref=6 EndExtUserPrmData ExtUserPrmData=241 "Pruefzifferausg. Code93" Bit(4) 0 0-1 Prm_Text_Ref=6 EndExtUserPrmData ExtUserPrmData=242 "Pruefziffermodus 2/5 Interl." Unsigned8 0 0-3 Prm_Text_Ref=7 EndExtUserPrmData ;------------------------------ ; for modul 8 ;------------------------------ ExtUserPrmData=250 "EAN 128 Datenbezeichner" Unsigned16 10000 0-10000 EndExtUserPrmData ExtUserPrmData=251 "Datenbezeichner" Bit(6) 0 0-1 Prm_Text_Ref=23 EndExtUserPrmData ExtUserPrmData=252 "Symbologie-Identifikator" Bit(7) 1 0-1 Prm_Text_Ref=23 EndExtUserPrmData ;------------------------------ ; for modul 9 ;------------------------------ ExtUserPrmData=260 "Laser Start Position" Unsigned8 0 0-99 EndExtUserPrmData ExtUserPrmData=261 "Laser Stop Position" Unsigned8 100 0-100 EndExtUserPrmData ;------------------------------ ; for modul 10 ;------------------------------ ExtUserPrmData=270 "Strichbreitenverhaeltnis" Unsigned8 185 0-255 EndExtUserPrmData ExtUserPrmData=271 "Strichbreitenueberpruefung" Unsigned8 75 0-255 EndExtUserPrmData ExtUserPrmData=272 "Sicherheitsabstand" Unsigned8 5 0-255 EndExtUserPrmData ExtUserPrmData=273 "Lueckenbreitenverhaeltnis" Unsigned8 3 0-255 EndExtUserPrmData ExtUserPrmData=274 "Leserichtung" Bit(5) 0 0-1 Prm_Text_Ref=9 EndExtUserPrmData ;------------------------------ ; for modul 11 ;------------------------------ ExtUserPrmData=280 "Lesesicherheit (Equal Scans)" Unsigned8 2 1-255 EndExtUserPrmData ExtUserPrmData=281 "Ruhezone" Unsigned8 7 3-10 EndExtUserPrmData ExtUserPrmData=282 "Elementverhaeltnis" Unsigned8 8 2-12 EndExtUserPrmData ExtUserPrmData=283 "Zeit zwischen 2 Labeln" Bit(7) 0 0-1 Prm_Text_Ref=22 EndExtUserPrmData ExtUserPrmData=284 "Position zwischen 2 Labeln" Bit(6) 0 0-1 Prm_Text_Ref=22 EndExtUserPrmData ;------------------------------ ; for modul 12 ;------------------------------ ExtUserPrmData=290 "Text bei Fehllesung" Unsigned8 0 0-255 EndExtUserPrmData ExtUserPrmData=295 "Text bei Fehllesung" Unsigned8 63 0-255 EndExtUserPrmData ExtUserPrmData=291 "Dekodiererg. bei Lesetoranfang" Bit(5) 0 0-1 Prm_Text_Ref=10 EndExtUserPrmData ExtUserPrmData=293 "Fuellmode" BitArea(4-5) 3 0-3 Prm_Text_Ref=12 EndExtUserPrmData ExtUserPrmData=292 "Datenausrichtung" Bit(0) 0 0-1 Prm_Text_Ref=11 EndExtUserPrmData ExtUserPrmData=294 "Fuellzeichen" Unsigned8 45 0-255 EndExtUserPrmData ;------------------------------ ; for modul 13 ;------------------------------ ExtUserPrmData=300 "Invertierung" Unsigned8 0 0-1 Prm_Text_Ref=13 EndExtUserPrmData ExtUserPrmData=301 "Modus" Unsigned8 1 0-1 Prm_Text_Ref=14 EndExtUserPrmData ExtUserPrmData=302 "Entprellzeit" Unsigned8 5 0-255 EndExtUserPrmData ExtUserPrmData=303 "Einschaltverzoegerung" Unsigned16 0 0-65535 EndExtUserPrmData ExtUserPrmData=304 "Mindesteinschaltdauer" Unsigned16 0 0-65535 EndExtUserPrmData ExtUserPrmData=305 "Ausschaltverzoegerung" Unsigned16 0 0-65535 EndExtUserPrmData ExtUserPrmData=306 "Funktion" Unsigned8 1 0-3 Prm_Text_Ref=15 EndExtUserPrmData ;------------------------------ ; for modul 14 ;------------------------------ ExtUserPrmData=310 "Ruhepegel" Unsigned8 0 0-1 Prm_Text_Ref=16 EndExtUserPrmData ExtUserPrmData=311 "Einschaltverzoegerung" Unsigned8 0 0-63 EndExtUserPrmData ExtUserPrmData=312 "Einschaltdauer" Unsigned16 400 0-1300 EndExtUserPrmData ExtUserPrmData=313 "[EF] Lesetorende" Bit(0) 0 0-1 Prm_Text_Ref=17 EndExtUserPrmData ExtUserPrmData=314 "[EF] Lesetoranfang" Bit(1) 0 0-1 Prm_Text_Ref=17 EndExtUserPrmData ExtUserPrmData=315 "[EF] Pos. Ref.Codevergleich 1" Bit(2) 0 0-1 Prm_Text_Ref=17 EndExtUserPrmData ExtUserPrmData=316 "[EF] Neg. Ref.Codevergleich 1" Bit(3) 0 0-1 Prm_Text_Ref=17 EndExtUserPrmData ExtUserPrmData=317 "[EF] Gueltiges Leseergebnis" Bit(4) 0 0-1 Prm_Text_Ref=17 EndExtUserPrmData ExtUserPrmData=318 "[EF] Ungueltiges Leseergebnis" Bit(5) 1 0-1 Prm_Text_Ref=17 EndExtUserPrmData ExtUserPrmData=319 "[EF] Pos. Ref.Codevergleich 2" Bit(6) 0 0-1 Prm_Text_Ref=17 EndExtUserPrmData ExtUserPrmData=320 "[EF] Neg. Ref.Codevergleich 2" Bit(7) 0 0-1 Prm_Text_Ref=17 EndExtUserPrmData ExtUserPrmData=321 "[EF] AutoControl - schlecht" Bit(0) 0 0-1 Prm_Text_Ref=17 EndExtUserPrmData ExtUserPrmData=322 "[EF] AutoControl - gut" Bit(1) 0 0-1 Prm_Text_Ref=17 EndExtUserPrmData ExtUserPrmData=323 "[EF] PROFIBUS pos. Flanke" Bit(4) 0 0-1 Prm_Text_Ref=17 EndExtUserPrmData ExtUserPrmData=335 "[EF] PROFIBUS neg. Flanke" Bit(5) 0 0-1 Prm_Text_Ref=17 EndExtUserPrmData ExtUserPrmData=324 "[AF] Lesetorende" Bit(0) 0 0-1 Prm_Text_Ref=17 EndExtUserPrmData ExtUserPrmData=325 "[AF] Lesetoranfang" Bit(1) 1 0-1 Prm_Text_Ref=17 EndExtUserPrmData ExtUserPrmData=326 "[AF] Pos. Ref.Codevergleich 1" Bit(2) 0 0-1 Prm_Text_Ref=17 EndExtUserPrmData ExtUserPrmData=327 "[AF] Neg. Ref.Codevergleich 1" Bit(3) 0 0-1 Prm_Text_Ref=17 EndExtUserPrmData ExtUserPrmData=328 "[AF] Gueltiges Leseergebnis" Bit(4) 0 0-1 Prm_Text_Ref=17 EndExtUserPrmData ExtUserPrmData=329 "[AF] Ungueltiges Leseergebnis" Bit(5) 0 0-1 Prm_Text_Ref=17 EndExtUserPrmData ExtUserPrmData=330 "[AF] Pos. Ref.Codevergleich 2" Bit(6) 0 0-1 Prm_Text_Ref=17 EndExtUserPrmData ExtUserPrmData=331 "[AF] Neg. Ref.Codevergleich 2" Bit(7) 0 0-1 Prm_Text_Ref=17 EndExtUserPrmData ExtUserPrmData=332 "[AF] AutoControl - schlecht" Bit(0) 0 0-1 Prm_Text_Ref=17 EndExtUserPrmData ExtUserPrmData=333 "[AF] AutoControl - gut" Bit(1) 0 0-1 Prm_Text_Ref=17 EndExtUserPrmData ExtUserPrmData=334 "[AF] PROFIBUS pos. Flanke" Bit(4) 0 0-1 Prm_Text_Ref=17 EndExtUserPrmData ExtUserPrmData=336 "[AF] PROFIBUS neg. Flanke" Bit(5) 0 0-1 Prm_Text_Ref=17 EndExtUserPrmData ;------------------------------ ; for modul 15 ;------------------------------ ExtUserPrmData=340 "Modus" Unsigned8 1 1-5 Prm_Text_Ref=18 EndExtUserPrmData ExtUserPrmData=341 "Entprellzeit" Unsigned8 10 2-31 EndExtUserPrmData ;------------------------------ ; for modul 16 ;------------------------------ ExtUserPrmData=350 "Modus" Unsigned8 0 0-2 Prm_Text_Ref=19 EndExtUserPrmData ExtUserPrmData=351 "Grenzwert fuer Lesequalitaet" Unsigned8 50 0-100 EndExtUserPrmData ExtUserPrmData=352 "Empfindlichkeit" Unsigned8 0 0-255 EndExtUserPrmData ;------------------------------ ; for modul 17 ;------------------------------ ExtUserPrmData=361 "Dont-Care Zeichen" Unsigned8 42 0-127 EndExtUserPrmData ExtUserPrmData=362 "Ereignissteuerung" Unsigned8 1 0-4 Prm_Text_Ref=21 EndExtUserPrmData ExtUserPrmData=363 "Einstellungen (Vergl.Fkt 1)" Unsigned8 10 0-255 EndExtUserPrmData ExtUserPrmData=364 "Reihenfolge (Vergl.Fkt 1)" Unsigned8 1 1-24 EndExtUserPrmData ExtUserPrmData=365 "Barcode Vergl.Typ (Vergl.Fkt 1)" Unsigned8 2 1-128 EndExtUserPrmData ExtUserPrmData=367 "Einstellungen (Vergl.Fkt 2)" Unsigned8 10 0-255 EndExtUserPrmData ExtUserPrmData=368 "Reihenfolge (Vergl.Fkt 2)" Unsigned8 1 1-24 EndExtUserPrmData ExtUserPrmData=369 "Barcode Vergl.Typ (Vergl.Fkt 2)" Unsigned8 2 1-128 EndExtUserPrmData ExtUserPrmData=370 "maximale Vergleichsdatenlaenge" Unsigned8 20 0-64 EndExtUserPrmData ExtUserPrmData=371 "Vergleichsdaten" Unsigned8 0 0-127 EndExtUserPrmData ;------------------------------ ; for modul 34 ;------------------------------ ExtUserPrmData=400 "Fragmentlaenge" Unsigned8 1 1-48 EndExtUserPrmData ;------------------------------ ; for modul 49 ;------------------------------ ExtUserPrmData=401 "Vergleichswert (Event-Counter)" Unsigned16 0 0-65535 EndExtUserPrmData ExtUserPrmData=402 "Vergleichsmodus (Event-Counter)" Unsigned8 0 0-1 Prm_Text_Ref=24 EndExtUserPrmData ExtUserPrmData=403 "Ruecksetzmodus (Event-Counter)" Unsigned8 0 0-1 Prm_Text_Ref=25 EndExtUserPrmData ;---------------------------------------------------------------------- ; GSD_Revision = 2 Vendor_Name = "Leuze electronic GmbH + Co." Model_Name = "BCL34 LEUZE" Revision = "1.00" Ident_Number = 0x05d8 Protocol_Ident = 0 Station_Type = 0 FMS_supp = 0 Hardware_Release = "V01.00" Software_Release = "V01.23" ; 9.6_supp = 1 19.2_supp = 1 93.75_supp = 1 187.5_supp = 1 500_supp = 1 1.5M_supp = 1 3M_supp = 1 6M_supp = 1 12M_supp = 1 MaxTsdr_9.6 = 15 MaxTsdr_19.2 = 15 MaxTsdr_93.75 = 15 MaxTsdr_187.5 = 15 MaxTsdr_500 = 15 MaxTsdr_1.5M = 25 MaxTsdr_3M = 50 MaxTsdr_6M = 100 MaxTsdr_12M = 200 ; Redundancy = 0 Repeater_Ctrl_Sig = 0 24V_Pins = 0 Implementation_Type = "SPC3" Bitmap_Device = "LEUZ05D8" ; Freeze_Mode_supp = 1 Sync_Mode_supp = 1 Auto_Baud_supp = 1 Set_Slave_Add_supp = 0 Min_Slave_Intervall = 6 Modular_Station = 1 Max_Module = 36 Max_Input_Len = 160 Max_Output_Len = 14 Max_Data_Len = 174 Fail_Safe = 1 Max_Diag_Data_Len = 16 Modul_Offset = 0 Slave_Family = 11 ;---------------------------------------------------------------------- ; Unit_Diag_Area = 0-3 Value (0x03) = "Fehlertyp: ERROR, " Value (0x04) = "Fehlertyp: CRITICAL WARNING, " Unit_Diag_Area_End Unit_Diag_Area = 8-15 Value (0x02) = "Instabile Ident-Spannung" Value (0x06) = "Motor laeuft nicht an" Value (0x07) = "Motordrehzahl fehlerhaft" Value (0x08) = "EEPROM-Zugriff fehlgeschlagen" Value (0x09) = "Checksumme 0-893 fehlerhaft" Value (0x0A) = "Checksumme 896-989 fehlerhaft" Value (0x0B) = "Checksumme 992-1021 fehlerhaft" Value (0x0C) = "Stack-Ueberlauf aufgetreten" Value (0x60) = "EEPROM-Zugr. in Init. fehlerhaft" Value (0x61) = "Motordrehzahl in EEPROM falsch" Value (0x63) = "kein Speicherplatz f. Ref.-Code" Value (0x64) = "Defekt in Bereich 0-893" Value (0x65) = "Defekt in Bereich 896-989" Value (0x66) = "Defekt in Bereich 992-1021" Unit_Diag_Area_End ;---------------------------------------------------------------------- ; UserPrmData: Length and Preset: MAX_User_Prm_Data_Len = 227 Ext_User_Prm_Data_Const(0) = 0 Ext_User_Prm_Data_Ref(1) = 100 Ext_User_Prm_Data_Ref(2) = 101 Ext_User_Prm_Data_Ref(2) = 102 Ext_User_Prm_Data_Ref(3) = 103 Ext_User_Prm_Data_Ref(4) = 104 Ext_User_Prm_Data_Ref(5) = 105 Ext_User_Prm_Data_Ref(6) = 106 Ext_User_Prm_Data_Ref(6) = 107 Ext_User_Prm_Data_Ref(7) = 108 Ext_User_Prm_Data_Ref(8) = 109 Ext_User_Prm_Data_Ref(9) = 110 Ext_User_Prm_Data_Ref(10) = 111 Ext_User_Prm_Data_Ref(10) = 112 Ext_User_Prm_Data_Ref(11) = 113 Ext_User_Prm_Data_Ref(12) = 114 Ext_User_Prm_Data_Ref(13) = 115 Ext_User_Prm_Data_Ref(14) = 116 Ext_User_Prm_Data_Ref(14) = 117 Ext_User_Prm_Data_Ref(15) = 118 Ext_User_Prm_Data_Ref(16) = 119 ; Module="[M1] Codetabellenerweiterung 1" 0x00 Ext_Module_Prm_Data_Len = 5 Ext_User_Prm_Data_Const(0)= 1 Ext_User_Prm_Data_Ref(1) = 200 Ext_User_Prm_Data_Ref(2) = 201 Ext_User_Prm_Data_Ref(2) = 202 Ext_User_Prm_Data_Ref(3) = 203 Ext_User_Prm_Data_Ref(4) = 204 EndModule Module="[M2] Codetabellenerweiterung 2" 0x00 Ext_Module_Prm_Data_Len = 5 Ext_User_Prm_Data_Const(0)= 2 Ext_User_Prm_Data_Ref(1) = 200 Ext_User_Prm_Data_Ref(2) = 201 Ext_User_Prm_Data_Ref(2) = 202 Ext_User_Prm_Data_Ref(3) = 203 Ext_User_Prm_Data_Ref(4) = 204 EndModule Module="[M3] Codetabellenerweiterung 3" 0x00 Ext_Module_Prm_Data_Len = 5 Ext_User_Prm_Data_Const(0)= 3 Ext_User_Prm_Data_Ref(1) = 200 Ext_User_Prm_Data_Ref(2) = 201 Ext_User_Prm_Data_Ref(2) = 202 Ext_User_Prm_Data_Ref(3) = 203 Ext_User_Prm_Data_Ref(4) = 204 EndModule Module="[M4] Codetabellenerweiterung 4" 0x00 Ext_Module_Prm_Data_Len = 5 Ext_User_Prm_Data_Const(0)= 4 Ext_User_Prm_Data_Ref(1) = 200 Ext_User_Prm_Data_Ref(2) = 201 Ext_User_Prm_Data_Ref(2) = 202 Ext_User_Prm_Data_Ref(3) = 203 Ext_User_Prm_Data_Ref(4) = 204 EndModule Module="[M5] Multilabel" 0x30 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0)= 5 Ext_User_Prm_Data_Ref(1) = 210 EndModule Module="[M6] Lesetorsteuerung" 0x00 Ext_Module_Prm_Data_Len = 9 Ext_User_Prm_Data_Const(0)= 6 Ext_User_Prm_Data_Ref(1) = 220 Ext_User_Prm_Data_Ref(2) = 221 Ext_User_Prm_Data_Ref(3) = 222 Ext_User_Prm_Data_Ref(5) = 223 Ext_User_Prm_Data_Ref(7) = 224 EndModule Module="[M7] Pruefziffer" 0x00 Ext_Module_Prm_Data_Len = 6 Ext_User_Prm_Data_Const(0)= 7 Ext_User_Prm_Data_Ref(2) = 230 Ext_User_Prm_Data_Ref(2) = 231 Ext_User_Prm_Data_Ref(2) = 244 Ext_User_Prm_Data_Ref(2) = 245 Ext_User_Prm_Data_Ref(1) = 232 Ext_User_Prm_Data_Ref(1) = 233 Ext_User_Prm_Data_Ref(1) = 246 Ext_User_Prm_Data_Ref(1) = 243 Ext_User_Prm_Data_Ref(4) = 234 Ext_User_Prm_Data_Ref(4) = 235 Ext_User_Prm_Data_Ref(4) = 236 Ext_User_Prm_Data_Ref(4) = 237 Ext_User_Prm_Data_Ref(3) = 238 Ext_User_Prm_Data_Ref(3) = 239 Ext_User_Prm_Data_Ref(3) = 240 Ext_User_Prm_Data_Ref(3) = 241 Ext_User_Prm_Data_Ref(5) = 242 EndModule Module="[M8] EAN-Bezeichner" 0x00 Ext_Module_Prm_Data_Len = 4 Ext_User_Prm_Data_Const(0)= 8 Ext_User_Prm_Data_Ref(1) = 250 Ext_User_Prm_Data_Ref(3) = 251 Ext_User_Prm_Data_Ref(3) = 252 EndModule Module="[M9] Lasersteuerung" 0x00 Ext_Module_Prm_Data_Len = 3 Ext_User_Prm_Data_Const(0)= 9 Ext_User_Prm_Data_Ref(1) = 260 Ext_User_Prm_Data_Ref(2) = 261 EndModule Module="[M10] Pharmacode" 0x00 Ext_Module_Prm_Data_Len = 6 Ext_User_Prm_Data_Const(0)= 10 Ext_User_Prm_Data_Ref(1) = 270 Ext_User_Prm_Data_Ref(2) = 271 Ext_User_Prm_Data_Ref(3) = 272 Ext_User_Prm_Data_Ref(4) = 273 Ext_User_Prm_Data_Ref(5) = 274 EndModule Module="[M11] Codeart Eigenschaften" 0x00 Ext_Module_Prm_Data_Len = 5 Ext_User_Prm_Data_Const(0)= 11 Ext_User_Prm_Data_Ref(1) = 280 Ext_User_Prm_Data_Ref(2) = 281 Ext_User_Prm_Data_Ref(3) = 282 Ext_User_Prm_Data_Ref(4) = 283 Ext_User_Prm_Data_Ref(4) = 284 EndModule Module="[M12] Datenformatierung" 0x00 Ext_Module_Prm_Data_Len = 24 Ext_User_Prm_Data_Const(0)= 12 Ext_User_Prm_Data_Ref(21) = 291 Ext_User_Prm_Data_Ref(22) = 293 Ext_User_Prm_Data_Ref(22) = 292 Ext_User_Prm_Data_Ref(23) = 294 Ext_User_Prm_Data_Ref(1) = 295 Ext_User_Prm_Data_Ref(2) = 290 Ext_User_Prm_Data_Ref(3) = 290 Ext_User_Prm_Data_Ref(4) = 290 Ext_User_Prm_Data_Ref(5) = 290 Ext_User_Prm_Data_Ref(6) = 290 Ext_User_Prm_Data_Ref(7) = 290 Ext_User_Prm_Data_Ref(8) = 290 Ext_User_Prm_Data_Ref(9) = 290 Ext_User_Prm_Data_Ref(10) = 290 Ext_User_Prm_Data_Ref(11) = 290 Ext_User_Prm_Data_Ref(12) = 290 Ext_User_Prm_Data_Ref(13) = 290 Ext_User_Prm_Data_Ref(14) = 290 Ext_User_Prm_Data_Ref(15) = 290 Ext_User_Prm_Data_Ref(16) = 290 Ext_User_Prm_Data_Ref(17) = 290 Ext_User_Prm_Data_Ref(18) = 290 Ext_User_Prm_Data_Ref(19) = 290 Ext_User_Prm_Data_Ref(20) = 290 EndModule Module="[M13] Schalteingang" 0x10 Ext_Module_Prm_Data_Len = 11 Ext_User_Prm_Data_Const(0)= 13 Ext_User_Prm_Data_Ref(1) = 300 Ext_User_Prm_Data_Ref(2) = 301 Ext_User_Prm_Data_Ref(3) = 302 Ext_User_Prm_Data_Ref(4) = 303 Ext_User_Prm_Data_Ref(6) = 304 Ext_User_Prm_Data_Ref(8) = 305 Ext_User_Prm_Data_Ref(10) = 306 EndModule Module="[M14] Schaltausgang" 0x20 Ext_Module_Prm_Data_Len = 9 Ext_User_Prm_Data_Const(0)= 14 Ext_User_Prm_Data_Ref(1) = 310 Ext_User_Prm_Data_Ref(2) = 311 Ext_User_Prm_Data_Ref(3) = 312 Ext_User_Prm_Data_Ref(6) = 313 Ext_User_Prm_Data_Ref(6) = 314 Ext_User_Prm_Data_Ref(6) = 315 Ext_User_Prm_Data_Ref(6) = 316 Ext_User_Prm_Data_Ref(6) = 317 Ext_User_Prm_Data_Ref(6) = 318 Ext_User_Prm_Data_Ref(6) = 319 Ext_User_Prm_Data_Ref(6) = 320 Ext_User_Prm_Data_Ref(5) = 321 Ext_User_Prm_Data_Ref(5) = 322 Ext_User_Prm_Data_Ref(5) = 323 Ext_User_Prm_Data_Ref(5) = 335 Ext_User_Prm_Data_Ref(8) = 324 Ext_User_Prm_Data_Ref(8) = 325 Ext_User_Prm_Data_Ref(8) = 326 Ext_User_Prm_Data_Ref(8) = 327 Ext_User_Prm_Data_Ref(8) = 328 Ext_User_Prm_Data_Ref(8) = 329 Ext_User_Prm_Data_Ref(8) = 330 Ext_User_Prm_Data_Ref(8) = 331 Ext_User_Prm_Data_Ref(7) = 332 Ext_User_Prm_Data_Ref(7) = 333 Ext_User_Prm_Data_Ref(7) = 334 Ext_User_Prm_Data_Ref(7) = 336 EndModule Module="[M15] AutoReflAct" 0x30 Ext_Module_Prm_Data_Len = 3 Ext_User_Prm_Data_Const(0)= 15 Ext_User_Prm_Data_Ref(1) = 340 Ext_User_Prm_Data_Ref(2) = 341 EndModule Module="[M16] AutoControl" 0x11 Ext_Module_Prm_Data_Len = 4 Ext_User_Prm_Data_Const(0)= 16 Ext_User_Prm_Data_Ref(1) = 350 Ext_User_Prm_Data_Ref(2) = 351 Ext_User_Prm_Data_Ref(3) = 352 EndModule Module="[M17] Referenzcode" 0x30 Ext_Module_Prm_Data_Len = 75 Ext_User_Prm_Data_Const(0)= 17 Ext_User_Prm_Data_Ref(2) = 361 Ext_User_Prm_Data_Ref(3) = 362 Ext_User_Prm_Data_Ref(4) = 363 Ext_User_Prm_Data_Ref(5) = 364 Ext_User_Prm_Data_Ref(6) = 365 Ext_User_Prm_Data_Ref(7) = 367 Ext_User_Prm_Data_Ref(8) = 368 Ext_User_Prm_Data_Ref(9) = 369 Ext_User_Prm_Data_Ref(10) = 370 Ext_User_Prm_Data_Ref(11) = 371 Ext_User_Prm_Data_Ref(12) = 371 Ext_User_Prm_Data_Ref(13) = 371 Ext_User_Prm_Data_Ref(14) = 371 Ext_User_Prm_Data_Ref(15) = 371 Ext_User_Prm_Data_Ref(16) = 371 Ext_User_Prm_Data_Ref(17) = 371 Ext_User_Prm_Data_Ref(18) = 371 Ext_User_Prm_Data_Ref(19) = 371 Ext_User_Prm_Data_Ref(20) = 371 Ext_User_Prm_Data_Ref(21) = 371 Ext_User_Prm_Data_Ref(22) = 371 Ext_User_Prm_Data_Ref(23) = 371 Ext_User_Prm_Data_Ref(24) = 371 Ext_User_Prm_Data_Ref(25) = 371 Ext_User_Prm_Data_Ref(26) = 371 Ext_User_Prm_Data_Ref(27) = 371 Ext_User_Prm_Data_Ref(28) = 371 Ext_User_Prm_Data_Ref(29) = 371 Ext_User_Prm_Data_Ref(30) = 371 Ext_User_Prm_Data_Ref(31) = 371 Ext_User_Prm_Data_Ref(32) = 371 Ext_User_Prm_Data_Ref(33) = 371 Ext_User_Prm_Data_Ref(34) = 371 Ext_User_Prm_Data_Ref(35) = 371 Ext_User_Prm_Data_Ref(36) = 371 Ext_User_Prm_Data_Ref(37) = 371 Ext_User_Prm_Data_Ref(38) = 371 Ext_User_Prm_Data_Ref(39) = 371 Ext_User_Prm_Data_Ref(40) = 371 Ext_User_Prm_Data_Ref(41) = 371 Ext_User_Prm_Data_Ref(42) = 371 Ext_User_Prm_Data_Ref(43) = 371 Ext_User_Prm_Data_Ref(44) = 371 Ext_User_Prm_Data_Ref(45) = 371 Ext_User_Prm_Data_Ref(46) = 371 Ext_User_Prm_Data_Ref(47) = 371 Ext_User_Prm_Data_Ref(48) = 371 Ext_User_Prm_Data_Ref(49) = 371 Ext_User_Prm_Data_Ref(50) = 371 Ext_User_Prm_Data_Ref(51) = 371 Ext_User_Prm_Data_Ref(52) = 371 Ext_User_Prm_Data_Ref(53) = 371 Ext_User_Prm_Data_Ref(54) = 371 Ext_User_Prm_Data_Ref(55) = 371 Ext_User_Prm_Data_Ref(56) = 371 Ext_User_Prm_Data_Ref(57) = 371 Ext_User_Prm_Data_Ref(58) = 371 Ext_User_Prm_Data_Ref(59) = 371 Ext_User_Prm_Data_Ref(60) = 371 Ext_User_Prm_Data_Ref(61) = 371 Ext_User_Prm_Data_Ref(62) = 371 Ext_User_Prm_Data_Ref(63) = 371 Ext_User_Prm_Data_Ref(64) = 371 Ext_User_Prm_Data_Ref(65) = 371 Ext_User_Prm_Data_Ref(66) = 371 Ext_User_Prm_Data_Ref(67) = 371 Ext_User_Prm_Data_Ref(68) = 371 Ext_User_Prm_Data_Ref(69) = 371 Ext_User_Prm_Data_Ref(70) = 371 Ext_User_Prm_Data_Ref(71) = 371 Ext_User_Prm_Data_Ref(72) = 371 Ext_User_Prm_Data_Ref(73) = 371 Ext_User_Prm_Data_Ref(74) = 371 EndModule Module="[M18] Aktivierung" 0x20 Ext_Module_Prm_Data_Len = 1 Ext_User_Prm_Data_Const(0)= 18 EndModule Module="[M19] Aktivierung mit ACK" 0x20 Ext_Module_Prm_Data_Len = 1 Ext_User_Prm_Data_Const(0)= 19 EndModule Module="[M20] Decoderstatus" 0x10 Ext_Module_Prm_Data_Len = 1 Ext_User_Prm_Data_Const(0)= 20 EndModule Module="[M21] Decodiererg. (4 Byte)" 0x95 Ext_Module_Prm_Data_Len = 1 Ext_User_Prm_Data_Const(0)= 21 EndModule Module="[M22] Decodiererg. (8 Byte)" 0x99 Ext_Module_Prm_Data_Len = 1 Ext_User_Prm_Data_Const(0)= 22 EndModule Module="[M23] Decodiererg. (12 Byte)" 0x9D Ext_Module_Prm_Data_Len = 1 Ext_User_Prm_Data_Const(0)= 23 EndModule Module="[M24] Decodiererg. (16 Byte)" 0xD8 Ext_Module_Prm_Data_Len = 1 Ext_User_Prm_Data_Const(0)= 24 EndModule Module="[M25] Decodiererg. (20 Byte)" 0xDA Ext_Module_Prm_Data_Len = 1 Ext_User_Prm_Data_Const(0)= 25 EndModule Module="[M26] Decodiererg. (24 Byte)" 0xDC Ext_Module_Prm_Data_Len = 1 Ext_User_Prm_Data_Const(0)= 26 EndModule Module="[M27] Decodiererg. (28 Byte)" 0xDE Ext_Module_Prm_Data_Len = 1 Ext_User_Prm_Data_Const(0)= 27 EndModule Module="[M34] Fragmentiertes Leseerg." 0x31 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0)= 34 Ext_User_Prm_Data_Ref(1) = 400 EndModule Module="[M35] Lesetoraktivierung" 0x50 Ext_Module_Prm_Data_Len = 1 Ext_User_Prm_Data_Const(0)= 35 EndModule Module="[M36] Lesetornummer" 0x50 Ext_Module_Prm_Data_Len = 1 Ext_User_Prm_Data_Const(0)= 36 EndModule Module="[M37] Scananzahl pro Lesetor" 0x50 Ext_Module_Prm_Data_Len = 1 Ext_User_Prm_Data_Const(0)= 37 EndModule Module="[M38] Codeposition" 0x50 Ext_Module_Prm_Data_Len = 1 Ext_User_Prm_Data_Const(0)= 38 EndModule Module="[M39] Lesesicherheit(EqualScans)" 0x50 Ext_Module_Prm_Data_Len = 1 Ext_User_Prm_Data_Const(0)= 39 EndModule Module="[M40] Scans pro Barcode" 0x50 Ext_Module_Prm_Data_Len = 1 Ext_User_Prm_Data_Const(0)= 40 EndModule Module="[M41] Scans mit Information" 0x50 Ext_Module_Prm_Data_Len = 1 Ext_User_Prm_Data_Const(0)= 41 EndModule Module="[M42] Dekodierqualitaet" 0x10 Ext_Module_Prm_Data_Len = 1 Ext_User_Prm_Data_Const(0)= 42 EndModule Module="[M43] Coderichtung" 0x10 Ext_Module_Prm_Data_Len = 1 Ext_User_Prm_Data_Const(0)= 43 EndModule Module="[M44] Stellenanzahl" 0x10 Ext_Module_Prm_Data_Len = 1 Ext_User_Prm_Data_Const(0)= 44 EndModule Module="[M45] Codeart" 0x10 Ext_Module_Prm_Data_Len = 1 Ext_User_Prm_Data_Const(0)= 45 EndModule Module="[M46] Justagemodus" 0x71 Ext_Module_Prm_Data_Len = 1 Ext_User_Prm_Data_Const(0)= 46 EndModule Module="[M47] Service" 0x30 Ext_Module_Prm_Data_Len = 1 Ext_User_Prm_Data_Const(0)= 47 EndModule Module="[M48] Justagemodus neu" 0x30 Ext_Module_Prm_Data_Len = 1 Ext_User_Prm_Data_Const(0)= 48 EndModule Module="[M49] Schaltausgang Erweiterung" 0x10 Ext_Module_Prm_Data_Len = 9 Ext_User_Prm_Data_Const(0)= 49 Ext_User_Prm_Data_Ref(1) = 401 Ext_User_Prm_Data_Ref(3) = 402 Ext_User_Prm_Data_Ref(4) = 403 Ext_User_Prm_Data_Const(5)= 0 Ext_User_Prm_Data_Const(6)= 0 Ext_User_Prm_Data_Const(7)= 0 Ext_User_Prm_Data_Const(8)= 0 EndModule