;====================================================== ; Device File for ST1H-PB ; Version: 1.0 delivered with GX Configurator-DP Ver.XXX ;====================================================== #Profibus_DP ; ;------------------------ common PrmText (No.1..49)---- PrmText = 1 Text(0) = "Disable" Text(1) = "Enable" EndPrmText PrmText = 2 Text(0) = "Clear" Text(1) = "Hold" EndPrmText ;--------------- PrmText for Head Module (No.50..69)---- PrmText = 50 Text(0) = "Stop" Text(1) = "Continue" EndPrmText ;--------------- PrmText for Digital Input/Output Module (No.70..99)---- PrmText = 70 Text(0) = "1.5ms" Text(1) = "0.5ms" EndPrmText ;--------------- PrmText for Other Modules (No.100..199)---- ; for ST1AD PrmText = 100 Text(0) = "-10 to 10V" Text(1) = "0 to 10V" Text(2) = "0 to 5V" Text(3) = "1 to 5V" Text(7) = "User range setting" EndPrmText PrmText = 102 Text(0) = "4 to 20mA" Text(1) = "0 to 20mA" Text(7) = "User range setting" EndPrmText ; for ST1DA PrmText = 104 Text(0) = "-10 to 10V" Text(1) = "0 to 10V" Text(2) = "0 to 5V" Text(3) = "1 to 5V" Text(7) = "User range setting" EndPrmText PrmText = 105 Text(0) = "4 to 20mA" Text(1) = "0 to 20mA" Text(7) = "User range setting" EndPrmText PrmText = 106 Text(0) = "Clear" Text(1) = "Hold" Text(2) = "Preset" EndPrmText ; ;------------------------ for Head Module (No.1..49) ---- ExtUserPrmData = 1 "Output status at module error" Bit(0) 0 0-1 Prm_Text_Ref = 50 EndExtUserPrmData ExtUserPrmData = 2 "Ext_Diag information" Bit(1) 1 0-1 Prm_Text_Ref = 1 EndExtUserPrmData ExtUserPrmData = 3 "Swap of input/output data" Bit(2) 0 0-1 Prm_Text_Ref = 1 EndExtUserPrmData ExtUserPrmData = 4 "Swap of Ext_Diag information" Bit(3) 0 0-1 Prm_Text_Ref = 1 EndExtUserPrmData ExtUserPrmData = 5 "Consistency function" Bit(4) 1 0-1 Prm_Text_Ref = 1 EndExtUserPrmData ;-------- for Digital Input/Output Module (No.50..99) ---- ; ExtUserPrmData = 50 "Clear/Hold setting" Bit(3) 0 0-1 Prm_Text_Ref = 2 EndExtUserPrmData ExtUserPrmData = 51 "Response time" BitArea(0-2) 0 0-1 Prm_Text_Ref = 70 EndExtUserPrmData ;----------------- for Intelligent Module (No.100..199) ---- ; for ST1AD ExtUserPrmData = 100 "CH1 input range setting" BitArea (0-3) 0 0-5 Prm_Text_Ref = 100 EndExtUserPrmData ExtUserPrmData = 101 "CH2 input range setting" BitArea (4-7) 0 0-5 Prm_Text_Ref = 100 EndExtUserPrmData ExtUserPrmData = 102 "CH1 input range setting" BitArea (0-3) 0 0-3 Prm_Text_Ref = 102 EndExtUserPrmData ExtUserPrmData = 103 "CH2 input range setting" BitArea (4-7) 0 0-3 Prm_Text_Ref = 102 EndExtUserPrmData ; for ST1DA ExtUserPrmData = 104 "CH1 output range setting" BitArea (0-3) 0 0-4 Prm_Text_Ref = 104 EndExtUserPrmData ExtUserPrmData = 105 "CH2 output range setting" BitArea (4-7) 0 0-4 Prm_Text_Ref = 104 EndExtUserPrmData ExtUserPrmData = 106 "CH1 output range setting" BitArea (0-3) 0 0-2 Prm_Text_Ref = 105 EndExtUserPrmData ExtUserPrmData=108 "CH1 Clear/Hold/Preset setting" BitArea (0-1) 0 0-2 Prm_Text_Ref = 106 EndExtUserPrmData ExtUserPrmData=109 "CH2 Clear/Hold/Preset setting" BitArea (2-3) 0 0-2 Prm_Text_Ref = 106 EndExtUserPrmData ; ;General parameters GSD_Revision = 2 Vendor_Name = "MITSUBISHI ELECTRIC CORPORATION" Model_Name = "ST1H-PB Mitsubishi" Revision = "AA" Ident_Number = 0x06DD Protocol_Ident = 0 Station_Type = 0 FMS_supp = 0 Hardware_Release = "A" Software_Release = "A" 9.6_supp = 1 19.2_supp = 1 45.45_supp = 1 93.75_supp = 1 187.5_supp = 1 500_supp = 1 1.5M_supp = 1 3M_supp = 1 6M_supp = 1 12M_supp = 1 MaxTsdr_9.6 = 60 MaxTsdr_19.2 = 60 MaxTsdr_45.45 = 250 MaxTsdr_93.75 = 60 MaxTsdr_187.5 = 60 MaxTsdr_500 = 100 MaxTsdr_1.5M = 150 MaxTsdr_3M = 250 MaxTsdr_6M = 450 MaxTsdr_12M = 800 Redundancy = 0 Repeater_Ctrl_Sig = 0 24V_Pins = 0 Implementation_Type ="SPC3" ; Slave-Specification: Freeze_Mode_supp = 1 Sync_Mode_supp = 1 Set_Slave_Add_Supp = 0 Auto_Baud_supp = 1 Min_Slave_Intervall = 1 Fail_Safe = 0 Max_Diag_Data_Len = 31 Slave_Family = 3 Modular_Station = 1 Modul_Offset = 0 max_module = 64 max_input_len = 152 max_output_len = 152 max_data_len = 304 ; UserPrmData: Length and Preset: Max_User_Prm_Data_Len = 97 ; ; -----------------------------------------------Head Module Ext_User_Prm_Data_Const(0) = 0x00,0x00 Ext_User_Prm_Data_Ref(1) = 1 Ext_User_Prm_Data_Ref(1) = 2 Ext_User_Prm_Data_Ref(1) = 3 Ext_User_Prm_Data_Ref(1) = 4 Ext_User_Prm_Data_Ref(1) = 5 Module="ST1H-PB 32pts.-whole consistent" 0xC0,0xC8,0xC8 Ext_Module_Prm_Data_Len = 0 EndModule Module="ST1H-PB 64pts.-whole consistent" 0xC0,0xCD,0xCD Ext_Module_Prm_Data_Len = 0 EndModule Module="ST1H-PB 128pts.-whole consistent" 0xC0,0xD7,0xD7 Ext_Module_Prm_Data_Len = 0 EndModule Module="ST1H-PB 256pts.-whole consistent" 0xC0,0xEB,0xEB Ext_Module_Prm_Data_Len = 0 EndModule Module="ST1H-PB 32pts.-word consistent " 0xC0,0x48,0x48 Ext_Module_Prm_Data_Len = 0 EndModule Module="ST1H-PB 64pts.-word consistent " 0xC0,0x4D,0x4D Ext_Module_Prm_Data_Len = 0 EndModule Module="ST1H-PB 128pts.-word consistent " 0xC0,0x57,0x57 Ext_Module_Prm_Data_Len = 0 EndModule Module="ST1H-PB 256pts.-word consistent " 0xC0,0x6B,0x6B Ext_Module_Prm_Data_Len = 0 EndModule ; -------------------------------------- POWER SUPPLY Module Module="ST1PSD 2/ 2/ -/ -" 0x00 Ext_Module_Prm_Data_Len = 1 Ext_User_Prm_Data_Const(0) = 0x30 EndModule Module="ST1PDD 2/ 2/ -/ -" 0x00 Ext_Module_Prm_Data_Len = 1 Ext_User_Prm_Data_Const(0) = 0x30 EndModule ; ----------------------------------------------Input Module ; INPUT Module="ST1X2-DE1 2/ 2/ -/ -" 0x00 Ext_Module_Prm_Data_Len = 1 Ext_User_Prm_Data_Const(0) = 0x20 Ext_User_Prm_Data_Ref(0) = 51 EndModule Module="ST1X4-DE1 4/ 4/ -/ -" 0x00 Ext_Module_Prm_Data_Len = 1 Ext_User_Prm_Data_Const(0) = 0x40 Ext_User_Prm_Data_Ref(0) = 51 EndModule Module="ST1X16-DE1 16/ 16/ -/ -" 0x00 Ext_Module_Prm_Data_Len = 1 Ext_User_Prm_Data_Const(0) = 0x80 Ext_User_Prm_Data_Ref(0) = 51 EndModule ; ---------------------------------------------Output Module Module="ST1Y2-TE2 2/ 2/ -/ -" 0x00 Ext_Module_Prm_Data_Len = 1 Ext_User_Prm_Data_Const(0) = 0x37 Ext_User_Prm_Data_Ref(0) = 50 EndModule Module="ST1Y2-TPE3 2/ 2/ -/ -" 0x00 Ext_Module_Prm_Data_Len = 1 Ext_User_Prm_Data_Const(0) = 0x37 Ext_User_Prm_Data_Ref(0) = 50 EndModule Module="ST1Y2-R2 2/ 2/ -/ -" 0x00 Ext_Module_Prm_Data_Len = 1 Ext_User_Prm_Data_Const(0) = 0x37 Ext_User_Prm_Data_Ref(0) = 50 EndModule Module="ST1Y16-TE2 16/ 16/ -/ -" 0x00 Ext_Module_Prm_Data_Len = 1 Ext_User_Prm_Data_Const(0) = 0x97 Ext_User_Prm_Data_Ref(0) = 50 EndModule Module="ST1Y16-TPE3 16/ 16/ -/ -" 0x00 Ext_Module_Prm_Data_Len = 1 Ext_User_Prm_Data_Const(0) = 0x97 Ext_User_Prm_Data_Ref(0) = 50 EndModule ; ---------------------------------------ANALOG INPUT Module ; ST1AD Module = "ST1AD2-V 4/ 4/ 2/ 2" 0xF1 Ext_Module_Prm_Data_Len = 3 Ext_User_Prm_Data_Const(0) = 0x00,0x80,0x00 Ext_User_Prm_Data_Ref(2) = 100 Ext_User_Prm_Data_Ref(2) = 101 EndModule Module = "ST1AD2-V(without Ww) 4/ 4/ 2/ 0" 0xD1 Ext_Module_Prm_Data_Len = 3 Ext_User_Prm_Data_Const(0) = 0x00,0x80,0x00 Ext_User_Prm_Data_Ref(2) = 100 Ext_User_Prm_Data_Ref(2) = 101 EndModule Module = "ST1AD2-I 4/ 4/ 2/ 2" 0xF1 Ext_Module_Prm_Data_Len = 3 Ext_User_Prm_Data_Const(0) = 0x00,0x82,0x00 Ext_User_Prm_Data_Ref(2) = 102 Ext_User_Prm_Data_Ref(2) = 103 EndModule Module = "ST1AD2-I(without Ww) 4/ 4/ 2/ 0" 0xD1 Ext_Module_Prm_Data_Len = 3 Ext_User_Prm_Data_Const(0) = 0x00,0x82,0x00 Ext_User_Prm_Data_Ref(2) = 102 Ext_User_Prm_Data_Ref(2) = 103 EndModule ; --------------------------------------ANALOG OUTPUT Module ; SA1DA Module = "ST1DA2-V 4/ 4/ 2/ 2" 0xF1 Ext_Module_Prm_Data_Len = 3 Ext_User_Prm_Data_Const(0) = 0x00,0x40,0x00 Ext_User_Prm_Data_Ref(0) = 108 Ext_User_Prm_Data_Ref(0) = 109 Ext_User_Prm_Data_Ref(2) = 104 Ext_User_Prm_Data_Ref(2) = 105 EndModule Module = "ST1DA2-V(without Wr) 4/ 4/ 0/ 2" 0xE1 Ext_Module_Prm_Data_Len = 3 Ext_User_Prm_Data_Const(0) = 0x00,0x40,0x00 Ext_User_Prm_Data_Ref(0) = 108 Ext_User_Prm_Data_Ref(0) = 109 Ext_User_Prm_Data_Ref(2) = 104 Ext_User_Prm_Data_Ref(2) = 105 EndModule Module = "ST1DA1-I 4/ 4/ 2/ 2" 0xF1 Ext_Module_Prm_Data_Len = 3 Ext_User_Prm_Data_Const(0) = 0x00,0x42,0x00 Ext_User_Prm_Data_Ref(0) = 108 Ext_User_Prm_Data_Ref(2) = 106 EndModule Module = "ST1DA1-I(without Wr) 4/ 4/ 0/ 2" 0xE1 Ext_Module_Prm_Data_Len = 3 Ext_User_Prm_Data_Const(0) = 0x00,0x42,0x00 Ext_User_Prm_Data_Ref(0) = 108 Ext_User_Prm_Data_Ref(2) = 106 EndModule