;============================================================================
;    Device description file according to DIN 19245 Part 3 (PROFIBUS-DP)
;============================================================================
;
; FILENAME        : WAGOB754.GSD
;----------------------------------------------------------------------------
; DEVICENAME      : Fieldbuscoupler PROFIBUS-DP/V1 12MBaud
;----------------------------------------------------------------------------
; DEVICEFAMILY    : WAGO->I/O->SYSTEM
;----------------------------------------------------------------------------
; PROTOCOL        : PROFIBUS-DP/V1 (Slave)
;----------------------------------------------------------------------------
; VENDOR          : WAGO Kontakttechnik GmbH
;                   Hansastrasse 27
;                   D-32423 Minden/Westf.
;                   Germany
;                   Phone: +49 (0) 571 / 887-0
;                   Fax  : +49 (0) 571 / 887-169
;----------------------------------------------------------------------------
; ORDER-NO        : 750-333 (/...-...)
;----------------------------------------------------------------------------
; CONTACT         : Mr. Detlef Brand
;                   Phone: +49 (0) 571 / 887-473
;                   Fax  : +49 (0) 571 / 887-8473
;----------------------------------------------------------------------------
; FILE VERSION    : 1.00
;----------------------------------------------------------------------------
; DATE            : 15.11.00
;----------------------------------------------------------------------------
; MODIFICATIONS   :
; DATE         AUTHOR   REVISION   DESCRIPTION:
; 15.11.2000   Bra      1.00       1st Release
;
;
;----------------------------------------------------------------------------
; REMARKS         : Acyclic PROFIBUS-DP/V1-Services are not supported
;
;============================================================================
#Profibus_DP
PrmText = 1
Text(0) = "POWER ON RESET"
Text(1) = "AUTORESET"
EndPrmText
PrmText = 2
Text(0) = "disabled"
Text(1) = "enabled"
EndPrmText
PrmText = 3
Text(0) = "INTEL"
Text(1) = "MOTOROLA"
EndPrmText
PrmText = 4
Text(0) = "Terminalbus stops transmission"
Text(1) = "Output image is cleared"
Text(2) = "Output image is stored"
Text(3) = "Substitude Values are switched"
EndPrmText
PrmText = 5
Text(0) = "PROFIBUS communication stops"
Text(1) = "Input image is cleared"
Text(2) = "Input image is stored"
EndPrmText
PrmText = 10
Text(0) = "not plugged"
Text(1) = "plugged"
EndPrmText
ExtUserPrmData = 1 "Restart on K-Bus Failure"
Bit(0) 0 0-1
Prm_Text_Ref = 1
EndExtUserPrmData
ExtUserPrmData = 2 "Device Diagnosis"
BIT(1) 1 0-1
Prm_Text_Ref = 2
EndExtUserPrmData
ExtUserPrmData = 3 "Process Data Representation"
BIT(3) 1 0-1
Prm_Text_Ref = 3
EndExtUserPrmData
ExtUserPrmData = 4 "Response to PROFIBUS DP Failure"
BITAREA (0-2) 3 0-4
Prm_Text_Ref = 4
EndExtUserPrmData
ExtUserPrmData = 5 "Response to K-Bus Failure"
BITAREA (3-5) 0 0-2
Prm_Text_Ref = 5
EndExtUserPrmData
ExtUserPrmData = 10 "Terminal is physically"
BIT(5) 1 0-1
Prm_Text_Ref = 10
EndExtUserPrmData
ExtUserPrmData = 20 "Diagnosis Channel 1"
BIT(2) 0 0-1
Prm_Text_Ref = 2
EndExtUserPrmData
ExtUserPrmData = 21 "Diagnosis Channel 2"
BIT(3) 0 0-1
Prm_Text_Ref = 2
EndExtUserPrmData
ExtUserPrmData = 22 "Diagnosis Channel 3"
BIT(0) 0 0-1
Prm_Text_Ref = 2
EndExtUserPrmData
ExtUserPrmData = 23 "Diagnosis Channel 4"
BIT(1) 0 0-1
Prm_Text_Ref = 2
EndExtUserPrmData
ExtUserPrmData = 24 "Substitude Value Channel 1"
BIT(0) 0 0-1
EndExtUserPrmData
ExtUserPrmData = 25 "Substitude Value Channel 2"
BIT(1) 0 0-1
EndExtUserPrmData
ExtUserPrmData = 26 "Substitude Value Channel 3"
BIT(2) 0 0-1
EndExtUserPrmData
ExtUserPrmData = 27 "Substitude Value Channel 4"
BIT(3) 0 0-1
EndExtUserPrmData
ExtUserPrmData = 28 "Substitude Value Channel 1"
UNSIGNED16 0 0-32767
EndExtUserPrmData
ExtUserPrmData = 29 "Substitude Value Channel 2"
UNSIGNED16 0 0-32767
EndExtUserPrmData
ExtUserPrmData = 30 "Substitude Value Channel 1"
UNSIGNED16 0 0-65535
EndExtUserPrmData
ExtUserPrmData = 31 "Substitude Value Channel 2"
UNSIGNED16 0 0-65535
EndExtUserPrmData
ExtUserPrmData = 32 "Diagnosis Field Voltage Fail"
BIT(2) 0 0-1
Prm_Text_Ref = 2
EndExtUserPrmData
ExtUserPrmData = 33 "Diagnosis Fuse blown"
BIT(3) 0 0-1
Prm_Text_Ref = 2
EndExtUserPrmData
GSD_Revision          = 2
Vendor_Name           = "WAGO Kontakttechnik GmbH"
Model_Name            = "750-333 WAGO"
Revision              = "1.00"
Ident_Number          = 0xB754
Protocol_Ident        = 0
Station_Type          = 0
FMS_supp              = 0
Hardware_Release      = "HW 01"
Software_Release      = "SW 01"

9.6_supp              = 1
19.2_supp             = 1
93.75_supp            = 1
187.5_supp            = 1
500_supp              = 1
1.5M_supp             = 1
3M_supp               = 1
6M_supp               = 1
12M_supp              = 1

MaxTsdr_9.6           = 60
MaxTsdr_19.2          = 60
MaxTsdr_93.75         = 60
MaxTsdr_187.5         = 60
MaxTsdr_500           = 100
MaxTsdr_1.5M          = 150
MaxTsdr_3M            = 250
MaxTsdr_6M            = 350
MaxTsdr_12M           = 550
Redundancy            = 0
Repeater_Ctrl_Sig     = 0
24V_Pins              = 0
Implementation_Type   = "DPC31-ASIC"
Bitmap_Device         = "buskopan"
Bitmap_Diag           = "buskopas"
Freeze_Mode_supp      = 1
Sync_Mode_supp        = 1
Auto_Baud_supp        = 1
Set_Slave_Add_supp    = 0
Min_Slave_Intervall   = 1
Modular_Station       = 1
Max_Module            = 64
Max_Input_Len         = 128
Max_Output_Len        = 128
Max_Data_Len          = 256
Modul_Offset          = 0
User_Prm_Data_Len     = 19
User_Prm_Data         = 0x00 , 0x00 , 0x00 , \
                        0x00 , 0x00 ,        \
                        0x00 , 0x00 ,        \
                        0x00 , 0x00 ,        \
                        0xCB , 0x43 ,        \
                        0x00 , 0x00 ,        \
                        0x00 , 0x01 ,        \
                        0x00 , 0x00 ,        \
                        0x00 , 0x00           
Fail_Safe             = 1
Slave_Family          = 3
Max_Diag_Data_Len     = 64
Max_User_Prm_Data_Len = 237
Ext_User_Prm_Data_Const(0)  = 0x00 , 0x00 , 0x00 
Ext_User_Prm_Data_Const(3)  = 0x00 , 0x00     
Ext_User_Prm_Data_Const(5)  = 0x00 , 0x00
Ext_User_Prm_Data_Const(7)  = 0x00 , 0x00
Ext_User_Prm_Data_Const(9)  = 0xCB , 0x43
Ext_User_Prm_Data_Const(11) = 0x00 , 0x00
Ext_User_Prm_Data_Const(13) = 0x00 , 0x01
Ext_User_Prm_Data_Const(15) = 0x00 , 0x00
Ext_User_Prm_Data_Const(17) = 0x00 , 0x00
Ext_User_Prm_Data_Ref(7)    = 1
Ext_User_Prm_Data_Ref(7)    = 2
Ext_User_Prm_Data_Ref(9)    = 3
Ext_User_Prm_Data_Ref(10)   = 4
Ext_User_Prm_Data_Ref(10)   = 5
Channel_Diag(16) = "Parameterization Fault"
Channel_Diag(17) = "Field Voltage is missing"
Channel_Diag(18) = "Fuse blown"
Channel_Diag(19) = "Buffer-Overrun"
Channel_Diag(26) = "SSI-Input faulty"
Channel_Diag(27) = "SSI-FRAME Fault"
Channel_Diag(20) = "Checksum faulty"
Channel_Diag(21) = "Parity Fault"
Channel_Diag(22) = "Partner Receive Timeout"
Channel_Diag(23) = "Receive Timeout"
Module = "WAGO NETCON Dummy" 0x00
1
Ext_Module_Prm_Data_Len = 0
EndModule
Module = "750-333 No PI Channel" 0x00
2
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x80 , 0x21 , 0x00
EndModule
Module = "750-333 2 Byte PI Channel" 0xB1
3
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x82 , 0x21 , 0x00
EndModule
Module = "750-400  2 DI/24 V DC/3.0 ms" 0x10
4
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x20 , 0x01 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
EndModule
Module = "*750-400  2 DI/24 V DC/3.0 ms" 0x00
5
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x20 , 0x01 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
EndModule
Module = "750-401  2 DI/24 V DC/0.2 ms" 0x10
6
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x20 , 0x01 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
EndModule
Module = "*750-401  2 DI/24 V DC/0.2 ms" 0x00
7
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x20 , 0x01 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
EndModule
Module = "750-402  4 DI/24 V DC/3.0 ms" 0x10
8
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x21 , 0x01 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
EndModule
Module = "*750-402  4 DI/24 V DC/3.0 ms" 0x00
9
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x21 , 0x01 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
EndModule
Module = "750-403  4 DI/24 V DC/0.2 ms" 0x10
10
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x21 , 0x01 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
EndModule
Module = "*750-403  4 DI/24 V DC/0.2 ms" 0x00
11
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x21 , 0x01 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
EndModule
Module = "750-404  V/R-Zaehler" 0xF2
12
Ext_Module_Prm_Data_Len = 4
Ext_User_Prm_Data_Const(0) = 0x20 , 0x76 , 0x01 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
EndModule
Module = "750-405  2 DI/230 V AC/10 ms" 0x10
13
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x20 , 0x01 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
EndModule
Module = "*750-405  2 DI/230 V AC/10 ms" 0x00
14
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x20 , 0x01 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
EndModule
Module = "750-406  2 DI/120 V AC/10 ms" 0x10
15
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x20 , 0x01 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
EndModule
Module = "*750-406  2 DI/120 V AC/10 ms" 0x00
16
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x20 , 0x01 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
EndModule
Module = "750-408  4 DI/24 V DC/3.0 ms" 0x10
17
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x21 , 0x01 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
EndModule
Module = "*750-408  4 DI/24 V DC/3.0 ms" 0x00
18
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x21 , 0x01 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
EndModule
Module = "750-409  4 DI/24 V DC/0.2 ms" 0x10
19
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x21 , 0x01 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
EndModule
Module = "*750-409  4 DI/24 V DC/0.2 ms" 0x00
20
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x21 , 0x01 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
EndModule
Module = "750-410  2 DI/24 V DC/3.0 ms" 0x10
21
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x20 , 0x01 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
EndModule
Module = "*750-410  2 DI/24 V DC/3.0 ms" 0x00
22
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x20 , 0x01 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
EndModule
Module = "750-411  2 DI/24 V DC/0.2 ms" 0x10
23
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x20 , 0x01 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
EndModule
Module = "*750-411  2 DI/24 V DC/0.2 ms" 0x00
24
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x20 , 0x01 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
EndModule
Module = "750-412  2 DI/48 V DC/3.0 ms" 0x10
25
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x20 , 0x01 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
EndModule
Module = "*750-412  2 DI/48 V DC/3.0 ms" 0x00
26
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x20 , 0x01 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
EndModule
Module = "750-413  2 DI/48 V DC/0.2 ms" 0x10
27
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x20 , 0x01 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
EndModule
Module = "*750-413  2 DI/48 V DC/0.2 ms" 0x00
28
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x20 , 0x01 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
EndModule
Module = "750-414  4 DI/5 V DC/0.2 ms" 0x10
29
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x21 , 0x01 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
EndModule
Module = "*750-414  4 DI/5 V DC/0.2 ms" 0x00
30
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x21 , 0x01 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
EndModule
Module = "750-415 4 DI/24 V AC/DC/20 ms" 0x10
31
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x21 , 0x01 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
EndModule
Module = "*750-415 4 DI/24 V AC/DC/20 ms" 0x00
32
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x21 , 0x01 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
EndModule
Module = "750-418 2 DI/24 V DC DIA ACK" 0x30
33
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x21 , 0x07 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(0) = 20
Ext_User_Prm_Data_Ref(0) = 21
EndModule
Module = "*750-418 2 DI/24 V DC DIA ACK" 0x00
34
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x21 , 0x07 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(0) = 20
Ext_User_Prm_Data_Ref(0) = 21
EndModule
Module = "750-419 2 DI/24 V DC DIA" 0x10
35
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x21 , 0x05 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(0) = 20
Ext_User_Prm_Data_Ref(0) = 21
EndModule
Module = "*750-419 2 DI/24 V DC DIA" 0x00
36
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x21 , 0x05 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(0) = 20
Ext_User_Prm_Data_Ref(0) = 21
EndModule
Module = "750-424 4 DI/24 V DC " 0x10
37
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x21 , 0x01 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
EndModule
Module = "*750-424 4 DI/24 V DC" 0x00
38
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x21 , 0x01 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
EndModule
Module = "750-425 2 DI/24 V DC NAMUR" 0x30
39
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x21 , 0x07 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(0) = 20
Ext_User_Prm_Data_Ref(0) = 21
EndModule
Module = "*750-425 2 DI/24 V DC NAMUR" 0x00
40
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x21 , 0x05 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(0) = 20
Ext_User_Prm_Data_Ref(0) = 21
EndModule
Module = "750-452  2 AI/0-20 mA/diff." 0x51
41
Ext_Module_Prm_Data_Len = 4
Ext_User_Prm_Data_Const(0) = 0x20 , 0x42 , 0x11 , 0x06
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(0) = 20
Ext_User_Prm_Data_Ref(0) = 21
EndModule
Module = "750-454  2 AI/4-20 mA/diff." 0x51
42
Ext_Module_Prm_Data_Len = 4
Ext_User_Prm_Data_Const(0) = 0x20 , 0x44 , 0x11 , 0x06
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(0) = 20
Ext_User_Prm_Data_Ref(0) = 21
EndModule
Module = "750-456  2 AI/±10 V/diff." 0x51
43
Ext_Module_Prm_Data_Len = 4
Ext_User_Prm_Data_Const(0) = 0x20 , 0x46 , 0x11 , 0x06
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(0) = 20
Ext_User_Prm_Data_Ref(0) = 21
EndModule
Module = "750-461  2 AI/RTD" 0x51
44
Ext_Module_Prm_Data_Len = 4
Ext_User_Prm_Data_Const(0) = 0x20 , 0x4B , 0x01 , 0x06
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(0) = 20
Ext_User_Prm_Data_Ref(0) = 21
EndModule
Module = "750-462  2 AI/TC" 0x51
45
Ext_Module_Prm_Data_Len = 4
Ext_User_Prm_Data_Const(0) = 0x20 , 0x4C , 0x01 , 0x06
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(0) = 20
Ext_User_Prm_Data_Ref(0) = 21
EndModule
Module = "750-465  2 AI/0-20 mA/SE" 0x51
46
Ext_Module_Prm_Data_Len = 4
Ext_User_Prm_Data_Const(0) = 0x20 , 0x4F , 0x11 , 0x06
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(0) = 20
Ext_User_Prm_Data_Ref(0) = 21
EndModule
Module = "750-466  2 AI/4-20 mA/SE" 0x51
47
Ext_Module_Prm_Data_Len = 4
Ext_User_Prm_Data_Const(0) = 0x20 , 0x50 , 0x11 , 0x06
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(0) = 20
Ext_User_Prm_Data_Ref(0) = 21
EndModule
Module = "750-467  2 AI/0-10 V/SE" 0x51
48
Ext_Module_Prm_Data_Len = 4
Ext_User_Prm_Data_Const(0) = 0x20 , 0x51 , 0x11 , 0x06
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(0) = 20
Ext_User_Prm_Data_Ref(0) = 21
EndModule
Module = "750-468  4 AI/0-10 V/SE" 0x53
49
Ext_Module_Prm_Data_Len = 4
Ext_User_Prm_Data_Const(0) = 0x20 , 0x52 , 0x11 , 0x06
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(0) = 20
Ext_User_Prm_Data_Ref(0) = 21
Ext_User_Prm_Data_Ref(0) = 22
Ext_User_Prm_Data_Ref(0) = 23
EndModule
Module = "750-469  2 AI/TC/OCM" 0x51
50
Ext_Module_Prm_Data_Len = 4
Ext_User_Prm_Data_Const(0) = 0x20 , 0x53 , 0x01 , 0x06
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(0) = 20
Ext_User_Prm_Data_Ref(0) = 21
EndModule
Module = "750-472  2 AI/0-20 mA/OVLP" 0x51
51
Ext_Module_Prm_Data_Len = 4
Ext_User_Prm_Data_Const(0) = 0x20 , 0x56 , 0x11 , 0x06
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(0) = 20
Ext_User_Prm_Data_Ref(0) = 21
EndModule
Module = "750-474  2 AI/4-20 mA/OVLP" 0x51
52
Ext_Module_Prm_Data_Len = 4
Ext_User_Prm_Data_Const(0) = 0x20 , 0x58 , 0x11 , 0x06
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(0) = 20
Ext_User_Prm_Data_Ref(0) = 21
EndModule
Module = "750-476  2 AI/±10 V" 0x51
53
Ext_Module_Prm_Data_Len = 4
Ext_User_Prm_Data_Const(0) = 0x20 , 0x5A , 0x11 , 0x06
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(0) = 20
Ext_User_Prm_Data_Ref(0) = 21
EndModule
Module = "750-478  2 AI/0-10 V" 0x51
54
Ext_Module_Prm_Data_Len = 4
Ext_User_Prm_Data_Const(0) = 0x20 , 0x5C , 0x11 , 0x06
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(0) = 20
Ext_User_Prm_Data_Ref(0) = 21
EndModule
Module = "750-479  2 AI/±10 V" 0x51
55
Ext_Module_Prm_Data_Len = 4
Ext_User_Prm_Data_Const(0) = 0x20 , 0x5D , 0x11 , 0x06
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(0) = 20
Ext_User_Prm_Data_Ref(0) = 21
EndModule
Module = "750-480  2 AI/0-20 mA" 0x51
56
Ext_Module_Prm_Data_Len = 4
Ext_User_Prm_Data_Const(0) = 0x20 , 0x5E , 0x11 , 0x06
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(0) = 20
Ext_User_Prm_Data_Ref(0) = 21
EndModule
Module = "750-491  1 AI/DMS-Bruecke" 0x51
57
Ext_Module_Prm_Data_Len = 4
Ext_User_Prm_Data_Const(0) = 0x20 , 0x69 , 0x11 , 0x06
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(0) = 20
Ext_User_Prm_Data_Ref(0) = 21
EndModule
Module = "750-501  2 DO/24 V DC/0.5 A" 0x20
58
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x20 , 0x02 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(2) = 24
Ext_User_Prm_Data_Ref(2) = 25
EndModule
Module = "*750-501  2 DO/24 V DC/0.5 A" 0x00
59
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x20 , 0x02 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(2) = 24
Ext_User_Prm_Data_Ref(2) = 25
EndModule
Module = "750-502  2 DO/24 V DC/2.0 A" 0x20
60
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x20 , 0x02 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(2) = 24
Ext_User_Prm_Data_Ref(2) = 25
EndModule
Module = "*750-502  2 DO/24 V DC/2.0 A" 0x00
61
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x20 , 0x02 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(2) = 24
Ext_User_Prm_Data_Ref(2) = 25
EndModule
Module = "750-504  4 DO/24 V DC/0.5 A" 0x20
62
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x21 , 0x02 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(2) = 24
Ext_User_Prm_Data_Ref(2) = 25
Ext_User_Prm_Data_Ref(2) = 26
Ext_User_Prm_Data_Ref(2) = 27
EndModule
Module = "*750-504  4 DO/24 V DC/0.5 A" 0x00
63
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x21 , 0x02 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(2) = 24
Ext_User_Prm_Data_Ref(2) = 25
Ext_User_Prm_Data_Ref(2) = 26
Ext_User_Prm_Data_Ref(2) = 27
EndModule
Module = "750-506  2 DO/24 V DC/0.5 A DIA" 0x20
64
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x21 , 0x03 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(0) = 20
Ext_User_Prm_Data_Ref(0) = 21
Ext_User_Prm_Data_Ref(2) = 24
Ext_User_Prm_Data_Ref(2) = 25
EndModule
Module = "*750-506  2 DO/24 V DC/0.5 A DIA" 0x00
65
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x21 , 0x03 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(0) = 20
Ext_User_Prm_Data_Ref(0) = 21
Ext_User_Prm_Data_Ref(2) = 24
Ext_User_Prm_Data_Ref(2) = 25
EndModule
Module = "750-507  2 DO/24 V DC/2.0 A DIA" 0x20
66
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x20 , 0x03 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(0) = 20
Ext_User_Prm_Data_Ref(0) = 21
Ext_User_Prm_Data_Ref(2) = 24
Ext_User_Prm_Data_Ref(2) = 25
EndModule
Module = "*750-507  2 DO/24 V DC/2.0 A DIA" 0x00
67
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x20 , 0x03 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(0) = 20
Ext_User_Prm_Data_Ref(0) = 21
Ext_User_Prm_Data_Ref(2) = 24
Ext_User_Prm_Data_Ref(2) = 25
EndModule
Module = "750-509  2 DO/230 V AC/0.3 A" 0x20
68
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x20 , 0x02 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(0) = 24
Ext_User_Prm_Data_Ref(0) = 25
EndModule
Module = "*750-509  2 DO/230 V AC/0.3 A" 0x00
69
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x20 , 0x02 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(0) = 24
Ext_User_Prm_Data_Ref(0) = 25
EndModule
Module = "750-511  2 DO 24 V DC/PWM" 0xF2
70
Ext_Module_Prm_Data_Len = 8
Ext_User_Prm_Data_Const(0) = 0x20 , 0xBD , 0x00 , 0x04 , 0x00 , 0x00 , 0x00 , 0x00  
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(4) = 28
Ext_User_Prm_Data_Ref(6) = 29
EndModule
Module = "750-512  2 DO Relay/250 V AC" 0x20
71
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x20 , 0x02 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(2) = 24
Ext_User_Prm_Data_Ref(2) = 25
EndModule
Module = "*750-512  2 DO Relay/250 V AC" 0x00
72
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x20 , 0x02 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(2) = 24
Ext_User_Prm_Data_Ref(2) = 25
EndModule
Module = "750-513  2 DO Relay/250 V AC" 0x20
73
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x20 , 0x02 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(2) = 24
Ext_User_Prm_Data_Ref(2) = 25
EndModule
Module = "*750-513  2 DO Relay/250 V AC" 0x00
74
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x20 , 0x02 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(2) = 24
Ext_User_Prm_Data_Ref(2) = 25
EndModule
Module = "750-514  2 DO Relay/125 V AC" 0x20
75
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x20 , 0x02 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(2) = 24
Ext_User_Prm_Data_Ref(2) = 25
EndModule
Module = "*750-514  2 DO Relay/125 V AC" 0x00
76
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x20 , 0x02 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(2) = 24
Ext_User_Prm_Data_Ref(2) = 25
EndModule
Module = "750-516  4 DO/24 V DC/0.5 A" 0x20
77
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x21 , 0x02 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(2) = 24
Ext_User_Prm_Data_Ref(2) = 25
Ext_User_Prm_Data_Ref(2) = 26
Ext_User_Prm_Data_Ref(2) = 27
EndModule
Module = "*750-516  4 DO/24 V DC/0.5 A" 0x00
78
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x21 , 0x02 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(2) = 24
Ext_User_Prm_Data_Ref(2) = 25
Ext_User_Prm_Data_Ref(2) = 26
Ext_User_Prm_Data_Ref(2) = 27
EndModule
Module = "750-517  2 DO Relay/230 V AC" 0x20
79
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x20 , 0x02 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(2) = 24
Ext_User_Prm_Data_Ref(2) = 25
EndModule
Module = "*750-517  2 DO Relay/230 V AC" 0x00
80
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x20 , 0x02 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(2) = 24
Ext_User_Prm_Data_Ref(2) = 25
EndModule
Module = "750-519  4 DO/5 V DC/20 mA" 0x20
81
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x21 , 0x02 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(2) = 24
Ext_User_Prm_Data_Ref(2) = 25
Ext_User_Prm_Data_Ref(2) = 26
Ext_User_Prm_Data_Ref(2) = 27
EndModule
Module = "*750-519  4 DO/5 V DC/20 mA" 0x00
82
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x21 , 0x02 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(2) = 24
Ext_User_Prm_Data_Ref(2) = 25
Ext_User_Prm_Data_Ref(2) = 26
Ext_User_Prm_Data_Ref(2) = 27
EndModule
Module = "750-522  2 DO/230V AC/0.5 A DIA" 0x20
83
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x20 , 0x03 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(0) = 20
Ext_User_Prm_Data_Ref(0) = 21
Ext_User_Prm_Data_Ref(2) = 24
Ext_User_Prm_Data_Ref(2) = 25
EndModule
Module = "*750-522  2 DO/230V AC/0.5 A DIA" 0x00
84
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x20 , 0x03 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(0) = 20
Ext_User_Prm_Data_Ref(0) = 21
Ext_User_Prm_Data_Ref(2) = 24
Ext_User_Prm_Data_Ref(2) = 25
EndModule
Module = "750-550  2 AO/0-10 V" 0x61
85
Ext_Module_Prm_Data_Len = 6
Ext_User_Prm_Data_Const(0) = 0x20 , 0x80 , 0x00 , 0x00 , 0x00 , 0x00 
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(2) = 28
Ext_User_Prm_Data_Ref(4) = 29
EndModule
Module = "750-552  2 AO/0-20 mA" 0x61
86
Ext_Module_Prm_Data_Len = 6
Ext_User_Prm_Data_Const(0) = 0x20 , 0x82 , 0x00 , 0x00 , 0x00 , 0x00 
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(2) = 28
Ext_User_Prm_Data_Ref(4) = 29
EndModule
Module = "750-554  2 AO/4-20 mA" 0x61
87
Ext_Module_Prm_Data_Len = 6
Ext_User_Prm_Data_Const(0) = 0x20 , 0x84 , 0x00 , 0x00 , 0x00 , 0x00 
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(2) = 28
Ext_User_Prm_Data_Ref(4) = 29
EndModule
Module = "750-556  2 AO/±10 V" 0x61
88
Ext_Module_Prm_Data_Len = 6
Ext_User_Prm_Data_Const(0) = 0x20 , 0x86 , 0x00 , 0x00 , 0x00 , 0x00 
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(2) = 30
Ext_User_Prm_Data_Ref(4) = 31
EndModule
Module = "750-610  P-Einsp. 24 V DC/DIA" 0x00
89
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x20 , 0x00 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(0) = 32
Ext_User_Prm_Data_Ref(0) = 33
EndModule
Module = "750-611  P-Einsp. 230 V AC/DIA" 0x00
90
Ext_Module_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x20 , 0x00 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(0) = 32
Ext_User_Prm_Data_Ref(0) = 33
EndModule
Module = "750-630  SSI-Intf. Standard" 0x95
91
Ext_Module_Prm_Data_Len = 4
Ext_User_Prm_Data_Const(0) = 0x20 , 0xC0 , 0x3A , 0x18
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(0) = 20
EndModule
Module = "750-630  SSI-Intf. Alternativ" 0x93
92
Ext_Module_Prm_Data_Len = 4
Ext_User_Prm_Data_Const(0) = 0x20 , 0xC0 , 0x3A , 0x18
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(0) = 20
EndModule
Module = "750-631  Encoder-Intf." 0xB5
93
Ext_Module_Prm_Data_Len = 4
Ext_User_Prm_Data_Const(0) = 0x20 , 0xC1 , 0x22 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(0) = 20
EndModule
Module = "750-635  Dig. Impuls-Intf." 0xB3
94
Ext_Module_Prm_Data_Len = 4
Ext_User_Prm_Data_Const(0) = 0x20 , 0xC5 , 0x00 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(0) = 20
EndModule
Module = "750-637  Encoder-Intf." 0xF2
95
Ext_Module_Prm_Data_Len = 4
Ext_User_Prm_Data_Const(0) = 0x20 , 0xC7 , 0x00 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(0) = 20
EndModule
Module = "750-638  V/R-Zaehler" 0xF2
96
Ext_Module_Prm_Data_Len = 4
Ext_User_Prm_Data_Const(0) = 0x20 , 0xC8 , 0x00 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
EndModule
Module = "750-650  RS232C-Intf. 5 Byte" 0xB5
97
Ext_Module_Prm_Data_Len = 4
Ext_User_Prm_Data_Const(0) = 0x20 , 0xD4 , 0x36 , 0x03
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(0) = 20
EndModule
Module = "750-650  RS232C-Intf. 3 Byte" 0xB3
98
Ext_Module_Prm_Data_Len = 4
Ext_User_Prm_Data_Const(0) = 0x20 , 0xD4 , 0x36 , 0x03
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(0) = 20
EndModule
Module = "750-651  TTY-Intf. 5 Byte" 0xB5
99
Ext_Module_Prm_Data_Len = 4
Ext_User_Prm_Data_Const(0) = 0x20 , 0xD5 , 0x36 , 0x02
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(0) = 20
EndModule
Module = "750-651  TTY-Intf. 3 Byte" 0xB3
100
Ext_Module_Prm_Data_Len = 4
Ext_User_Prm_Data_Const(0) = 0x20 , 0xD5 , 0x36 , 0x02
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(0) = 20
EndModule
Module = "750-653  RS485-Intf. 5 Byte" 0xB5
101
Ext_Module_Prm_Data_Len = 4
Ext_User_Prm_Data_Const(0) = 0x20 , 0xD7 , 0x36 , 0x03
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(0) = 20
EndModule
Module = "750-653  RS485-Intf. 3 Byte" 0xB3
102
Ext_Module_Prm_Data_Len = 4
Ext_User_Prm_Data_Const(0) = 0x20 , 0xD7 , 0x36 , 0x03
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(0) = 20
EndModule
Module = "750-654  Data Exch. Module" 0xF1
103
Ext_Module_Prm_Data_Len = 4
Ext_User_Prm_Data_Const(0) = 0x20 , 0xD8 , 0x00 , 0x00
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(0) = 20
EndModule