;************************   COMPANY INFORMATION   *************************
;*                                                                        *
;*  CREATED by Endress+Hauser GmbH+Co.                                    *
;*  PUBLISHED by Endress+Hauser Process Solutions AG, CH-4153 Reinach     *
;*                                                                        *
;********************   DEVICE and FILE INFORMATION   *********************
;*                                                                        *
;*                FILE NAME: EH3_1503.GSD                                 *
;*              DEVICE TYPE: PROFIBUS-PA                                  *
;*       DEVICE INFORMATION: Deltapilot S                                  *
;*    PROFILE COMPATIBILITY: PROFILE 3.0                                  *
;*      DPV1 IMPLEMENTATION: MSAC1_Read/Write                             *
;*                           MSAC2_Read/Write                             *
;*        IDENTIFIER FORMAT: Standard                                     *
;*                                                                        *
;**********************   GSD REVISION INFORMATION   **********************
;* $Revision::   0.2                                                   $  *
;* $Date::   28 Jul 2000 11:30:28                                      $  *
;*                                                                        *
;*    DATE    | NAME | VERSION |                  COMMENT                 *
;* ---------------------------------------------------------------------- *
;* 27.07.2000 | LG   |   0.2   | initial revision for profile 3.0         *
;**************************************************************************

;****************************  General DP Keywords  ***********************
#Profibus_DP
GSD_Revision        = 2
Vendor_Name         = "Endress + Hauser"
Model_Name          = "PL: Deltapilot S E+H"
Revision            = "Pepperl+Fuchs link"
Ident_Number        = 0x1503
Protocol_Ident      = 0
Station_Type        = 0
FMS_supp            = 0
Hardware_Release    = "All"
Software_Release    = "All"

9.6_supp            = 1
19.2_supp           = 1
45.45_supp          = 1
93.75_supp          = 1
187.5_supp          = 1
500_supp            = 1
1.5M_supp           = 1
3M_supp             = 1
6M_supp             = 1
12M_supp            = 1

MaxTsdr_9.6         = 60
MaxTsdr_19.2        = 60
MaxTsdr_45.45       = 60
MaxTsdr_93.75       = 60
MaxTsdr_187.5       = 60
MaxTsdr_500         = 100
MaxTsdr_1.5M        = 150
MaxTsdr_3M          = 250
MaxTsdr_6M          = 450
MaxTsdr_12M         = 800

Implementation_Type = "SPC4/ITEC"
Bitmap_Device       = "EH1503_N"
Bitmap_Diag         = "EH1503_D"
Bitmap_SF           = "EH1503_S"

;*********  Additional Keywords For Different Physical Interfaces  ********
;*****************  DP Master (Class 1) Related Keywords  *****************
;*********  Additional Master Related Keywords For DP Extensions  *********

;********************  Basic DP-Slave Related Keywords  *******************
Freeze_Mode_supp    = 1
Sync_Mode_supp      = 0
Auto_Baud_supp      = 0
Set_Slave_Add_supp  = 1
Min_Slave_Intervall = 6
Modular_Station     = 1
Max_Module          = 3
Max_Input_Len       = 10
Max_Output_Len      = 5
Max_Data_Len        = 15
Max_Diag_Data_Len   = 20

Unit_Diag_Bit(16)   = "Error appears"
Unit_Diag_Bit(17)   = "Error disappears"
Unit_Diag_Bit(24)   = "Hardware failure electronics"
Unit_Diag_Bit(25)   = "Hardware failure mechanics"
Unit_Diag_Bit(26)   = "Motor temperature too high"
Unit_Diag_Bit(27)   = "Electronic temperature too high"
Unit_Diag_Bit(28)   = "Memory error"
Unit_Diag_Bit(29)   = "Measurement failure"
Unit_Diag_Bit(30)   = "Device not initialized"
Unit_Diag_Bit(31)   = "Device initialization failed"
Unit_Diag_Bit(32)   = "Zero point error"
Unit_Diag_Bit(33)   = "Power supply failed"
Unit_Diag_Bit(34)   = "Configuration invalid"
Unit_Diag_Bit(35)   = "Restart"
Unit_Diag_Bit(36)   = "Coldstart"
Unit_Diag_Bit(37)   = "Maintenance required"
Unit_Diag_Bit(38)   = "Characteristics invalid"
Unit_Diag_Bit(39)   = "Ident_Number violation"
Unit_Diag_Bit(55)   = "Extension Available"                                 

Unit_Diag_Bit(59)   = "A114: EEPROM failure"
Unit_Diag_Bit(60)   = "W103: Init active"
Unit_Diag_Bit(61)   = "A121: EEPROM checksum error B"
Unit_Diag_Bit(62)   = "A101: Sensor EEPROM cs"
Unit_Diag_Bit(63)   = "A112: Sensor EEPROM fail"
Unit_Diag_Bit(64)   = "A125: Sensor ADC failure"
Unit_Diag_Bit(65)   = "A122: Sensor signal cut"
Unit_Diag_Bit(66)   = "A117: Sensor temp too low"
Unit_Diag_Bit(67)   = "A106: Download active"
Unit_Diag_Bit(68)   = "A116: Download error"
Unit_Diag_Bit(69)   = "A110: EEPROM checksum error A"
Unit_Diag_Bit(70)   = "W613: Device in simmode"
Unit_Diag_Bit(71)   = "A610: Calibration error"
Unit_Diag_Bit(72)   = "W604: Lin. curve 2 points error"
Unit_Diag_Bit(73)   = "W602: Lin. curve rising error"
Unit_Diag_Bit(74)   = "A605: Lin. table editing active"
Unit_Diag_Bit(76)   = "W102: EEPROM checksum error C"

Module    = "Main Process Value"   0x94
EndModule

Module    = "2nd Cyclic Value"   0x94
EndModule

Module    = "Display Value"   0xA4
EndModule

Module     = "Free Place"   0x00
EndModule

Slave_Family        = 12

;**************  Additional Keywords For Module Assignment  ***************
;***************  Slave Related Keywords For DP Extensions  ***************
;*************  Slave Related Keywords For ProfiSafe Profile  *************