;\**************************************************************************/
;\*  				KLAY INSTRUMENTS B.V.			   */
;\************************************************************************ */
;\*	GSD-file for:							   */
;\*		2000PA Level transmitter				   */
;\*		Profibus PA Profile V3.01				   */
;\*		Klay Instruments b.v.					   */
;\*		Author: M.M. van de Belt				   */
;\*		Date: 12-10-2005					   */
;\*									   */
;\*		DPV1-implementation:	MSAC2_read/write		   */
;\*		Revision 0.1						   */
;\**************************************************************************/
;/*******************************Algemeen DP********************************/
#Profibus_DP
GSD_Revision		= 3
Vendor_Name		= "Klay Instruments b.v."
Model_Name		= "2000PA Level KLAY"
Revision		= "V3.01"
Ident_Number		= 0x0A29
Protocol_Ident		= 0			;Profibus DP
Station_Type		= 0			;DP Slave
FMS_supp		= 0			;No mixed FMS/DP
Hardware_Release	= "V2.0"
Software_Release	= "V2.0"
31.25_supp		= 1
45.45_supp		= 1
93.75_supp		= 1
MaxTsdr_31.25		= 100
MaxTsdr_45.45		= 250
MaxTsdr_93.75		= 1000
Redundancy		= 0			;No redundancy support
Repeater_Ctrl_SIg	= 0
Implementation_Type	= "SPC4/i-tec"
24V_Pins		= 0
Bitmap_Device		= "KL0a29_N"
Bitmap_Diag		= "KL0a29_D"
Bitmap_SF		= "KL0a29_S"

Freeze_Mode_supp    	= 1
Sync_Mode_supp      	= 0
Set_Slave_Add_supp  	= 1
Min_Slave_Intervall 	= 250

User_Prm_Data_Len   	= 3
User_Prm_Data       	= 0, 0, 0

Modular_Station     	= 1
Max_Module          	= 2
Max_Input_Len       	= 10
Max_Output_Len      	= 0
Max_Data_Len        	= 10

Max_Diag_Data_Len   	= 14

Slave_Family        = 12


Unit_Diag_Bit(16)   = "Error appears"
Unit_Diag_Bit(17)   = "Error disappears"
Unit_Diag_Bit(24)   = "Hardware failure electronics"
Unit_Diag_Bit(25)   = "Hardware failure mechanics"
Unit_Diag_Bit(26)   = "Motor temperature too high"
Unit_Diag_Bit(27)   = "Electronic temperature too high"    
Unit_Diag_Bit(28)   = "Memory error"
Unit_Diag_Bit(29)   = "Measurement failure"
Unit_Diag_Bit(30)   = "Device not initialized"
Unit_Diag_Bit(31)   = "Device initialization failed"
Unit_Diag_Bit(32)   = "Zero point error"
Unit_Diag_Bit(33)   = "Power supply failed"
Unit_Diag_Bit(34)   = "Configuration invalid"
Unit_Diag_Bit(35)   = "Restart"
Unit_Diag_Bit(36)   = "Coldstart"
Unit_Diag_Bit(37)   = "Maintenance required"
Unit_Diag_Bit(38)   = "Characteristics invalid"
Unit_Diag_Bit(39)   = "Ident_Number violation"
Unit_Diag_Bit(55)   = "Extension Available"


DPV1_Slave		= 1
C1_Read_Write_supp	= 0				;No MS1
C2_Read_Write_supp	= 1				;MS2
C2_Max_Data_Len		= 128
C2_Response_Timeout	= 4000
C2_Read_Write_Required	= 1
C2_Max_Count_Channels	= 1
Max_Initiate_PDU_Length	= 52

;--- Description of physical interface for async. and sync. transmission: ---
Physical_Interface = 0                     ; RS-485 Standard Copper
Transmission_Delay_45.45 = 0
Reaction_Delay_45.45     = 0
Transmission_Delay_93.75 = 0
Reaction_Delay_93.75     = 0
End_Physical_Interface
;
Physical_Interface = 1                     ; IEC61158-2
Transmission_Delay_31.25 = 0
Reaction_Delay_31.25     = 0
End_Physical_Interface


Module     = "Level Value"   0x42,0x84,0x08,0x05
1
EndModule

Module     = "Level Value (short)"   0x94
2
EndModule

Module     = "Proces Temp Value"   0x42,0x84,0x08,0x05
3
EndModule

Module     = "Proces Temp Value (short)"   0x94
4
EndModule

Module     = "Empty"   0x00
5
EndModule