+31(0)174-671 800
1 Channel RS 485 Repeater 1
101-201101

1 Channel RS 485 Repeater 1

1 Channel standard RS 485 PROFIBUS repeater module for 12 Mbps with diagnostic LEDs and redundancy feature. Bus connection is utilized by screw terminals and additional DB9 connector.

Request offer

Introduction

null

The repeater channel is directly connected with the ProfiTrace OE core in the 1B/1C Head Station. Busmonitor data is directly available in the web server.

The advanced 12 Mbps core of the repeater module can be cascaded unlimitedly and has increased RS 485 strength. The data traffic is constantly monitored for glitches which are digitally filtered out. It has on-board switchable termination and able to drive 31 devices.

Technical specifications

Electrical and Mechanical

  • 1 Bus channel
  • 31 devices/bus-loads per channel
  • 1200 m cable length (depends on baudrate)
  • No limit in cascading
  • Termination switch
  • Removable screw terminals and 1 DB9 connector

Protocol

  • Transparent for all PROFIBUS protocols
  • 9.6 kbps - 12 Mbps (auto detection)
  • 2 bits delay time (12 bits in redundant mode)
  • No address required
  • Bus redundancy (selectable)

Backplane

  • 4 Networks selectable with switches
  • 10 Modules (positioned in the first 10 slots)
  • 200 mA current consumption

Others

  • LEDs (Error, Rx data, Termination ON)
  • Operating temperature: 0..60 °C
  • Dimensions: 140 x 110 x 25 mm
  • Weight: 150 g
UL listed

Want more information? Ask us.

Marco Bekker NLD, ENG, GER

Marco Bekker

Sales Engineer
T: +31 (0)174 671800

Downloads

Below you can find all the available downloads for this product.

Datasheet
Manual

Service & Support

FAQ's

Check the most frequently asked questions about ComBricks.

On-site & Online Support

Worldwide PROFIBUS and PROFINET support; on-site and online.

Network Certification

Find out what PROCENTEC can certify in your network.

GSD files

Find and download all the GSD files you need.

Software & Firmware downloads

Request firmware, software and download GSD-files.

Training

  • Certified PROFIBUS Engineer

    10 October 2016, 31 October 2016, 12 December 2016

    'Distinguish yourself from the others and show that you are the expert.....Become a Certified PROFIBUS Engineer.'

  • PROFIBUS Troubleshooting & Maintenance

    14 September 2016, 16 November 2016

    The PROFIBUS Troubleshooting and Maintenance training course is fully concentrated on those who install and maintain PROFIBUS installations.

  • PROFIBUS Product Development

    01 January 2016

    This training course is especially suited for product vendors and engineering companies who want to develop a PROFIBUS product.

Training overview