 |
Physical requirements |
| |
 Implemented
connector and bus polarity |
| |
Power
supply operating range (13V or 24V) |
| |
Static
current consumption |
| |
Inrush
current and power-up |
| |
Transmitter
test (baudrate, bit time, rise- and fall time, bit cell jitter,
signal amplitude, bias, overshoot, message build-up) |
| |
Receiver
test (response on minimum signal amplitude, bit cell jitter,
different preambles) |
| |
Noise
levels |
| |
|
| |
Bus transmission |
| |
Supported
addresses |
| |
Control
Interval Monitoring (DP watchdog) |
| |
TSDR
according to IEC 61158 |
| |
PNO
Ident Number (profile specific and/or device specific) |
| |
Min_Slave_Intervall |
| |
Mandatory
diagnostics |
| |
|
| |
Function |
| |
Power
supply on/off at device |
| |
Network
turned on/off at master |
| |
State
transitions for DP (state machine) |
| |
State
transitions for DP-V1 (state machine) |
| |
Class
2 master takes control |
| |
Master
parameterisation (with and without DP watchdog) |
| |
Optional
services (Sync, Freeze, Fail-Safe) |
| |
User
diagnostics |
| |
|
| |
Profile (3.0) |
| |
Block
addressing (physical, function, transducer) |
| |
Parameters
(length, rights, transport type, storage, object behaviour,
data conformance) |
| |
|
| |
Interoperability |
| |
1
Class 1 master + device under test |
| |
1
Class 1 master, 5 PA slaves, 2 DP slaves + device under test |
| |
1
Class 1 master, 1 Class 2 master, 5 PA slaves, 2 DP slaves
+ device under test |
| |
|
| |
Others |
| |
Duration
test |
| |
GSD
file check |
| |
EDD
file check |
| |
Manual
check |
